Subject: Re: error messages 2/19/2005 10:08 AM PST
By: wendy In: microsoft.public.windowsxp.general
Was this post helpful to you?
i found loads of stuff so here is some of it, im not sure which one i need to
put on concerning my problem but heres some of what i found, i hope its in
there. thanks
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7011
Date: 18/02/2005
Time: 08:01:46
User: N/A
Computer: WENDYSCOMP
Description:
Timeout (30000 milliseconds) waiting for a transaction response from the
NVSvc service.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type: Warning
Event Source: SimpTcp
Event Category: None
Event ID: 1
Date: 18/02/2005
Time: 07:58:07
User: N/A
Computer: WENDYSCOMP
Description:
The Simple TCP/IP Services could not find the TCP Echo port. The TCP Echo
service was not started.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: fc 2a 00 00 ü*..
Event Type: Error
Event Source: DCOM
Event Category: None
Event ID: 10010
Date: 18/02/2005
Time: 08:08:55
User: WENDYSCOMP\WENDY ROBSON
Computer: WENDYSCOMP
Description:
The server {F3A614DC-ABE0-11D2-A441-00C04F795683} did not register with DCOM
within the required timeout.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type: Warning
Event Source: Tcpip
Event Category: None
Event ID: 4226
Date: 18/02/2005
Time: 08:52:34
User: N/A
Computer: WENDYSCOMP
Description:
TCP/IP has reached the security limit imposed on the number of concurrent
TCP connect attempts.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 00 00 00 00 01 00 54 00 ......T.
0008: 00 00 00 00 82 10 00 80 ....‚..€
0010: 01 00 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........
Event Type: Error
Event Source: Cdrom
Event Category: None
Event ID: 7
Date: 18/02/2005
Time: 10:12:17
User: N/A
Computer: WENDYSCOMP
Description:
The device, \Device\CdRom1, has a bad block.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 03 01 68 00 01 00 b8 00 ..h...¸.
0008: 00 00 00 00 07 00 04 c0 .......À
0010: 00 01 00 00 00 00 00 00 ........
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 e0 a6 0f 00 00 00 00 .à ¦.....
0028: 69 ce 07 00 00 00 00 00 iÃŽ......
0030: ff ff ff ff 02 00 00 00 ÿÿÿÿ....
0038: 40 00 00 c4 02 00 01 00 @..Ä....
0040: ff 20 0a 12 4c 02 00 00 ÿ ..L...
0048: 00 00 00 00 0a 00 00 00 ........
0050: 00 00 68 fd 98 7d a4 ff ..hý˜}¤ÿ
0058: 00 00 00 00 48 f3 ae ff ....Hó®ÿ
0060: 02 00 00 00 dc f4 01 00 ....Üô..
0068: 28 00 00 01 f4 dc 00 00 (...ôÜ..
0070: 01 00 00 00 00 00 00 00 ........
0078: 70 00 03 00 00 00 00 0a p.......
0080: 00 00 00 00 02 00 00 00 ........
0088: 00 00 00 00 00 00 00 00 ........
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date: 19/02/2005
Time: 08:23:54
User: N/A
Computer: WENDYSCOMP
Description:
Faulting application explorer.exe, version 6.0.2900.2180, faulting module
explorer.exe, version 6.0.2900.2180, fault address 0x0000af87.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 65 78 70 ure exp
0018: 6c 6f 72 65 72 2e 65 78 lorer.ex
0020: 65 20 36 2e 30 2e 32 39 e 6.0.29
0028: 30 30 2e 32 31 38 30 20 00.2180
0030: 69 6e 20 65 78 70 6c 6f in explo
0038: 72 65 72 2e 65 78 65 20 rer.exe
0040: 36 2e 30 2e 32 39 30 30 6.0.2900
0048: 2e 32 31 38 30 20 61 74 .2180 at
0050: 20 6f 66 66 73 65 74 20 offset
0058: 30 30 30 30 61 66 38 37 0000af87
0060: 0d 0a ..
Event Type: Warning
Event Source: EvntAgnt
Event Category: None
Event ID: 1015
Date: 19/02/2005
Time: 08:21:45
User: N/A
Computer: WENDYSCOMP
Description:
TraceLevel parameter not located in registry; Default trace level used is 32.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type: Information
Event Source: MSDTC
Event Category: Disk
Event ID: 2444
Date: 19/02/2005
Time: 07:20:50
User: N/A
Computer: WENDYSCOMP
Description:
MS DTC started with the following settings:
Security Configuration (OFF = 0 and ON = 1):
Network Administration of Transactions = 0,
Network Clients = 0,
Inbound Distributed Transactions using Native MSDTC Protocol = 0,
Outbound Distributed Transactions using Native MSDTC Protocol = 0,
Transaction Internet Protocol (TIP) = 0,
XA Transactions = 0
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type: Information
Event Source: MSDTC
Event Category: Disk
Event ID: 2444
Date: 18/02/2005
Time: 07:58:04
User: N/A
Computer: WENDYSCOMP
Description:
MS DTC started with the following settings:
Security Configuration (OFF = 0 and ON = 1):
Network Administration of Transactions = 0,
Network Clients = 0,
Inbound Distributed Transactions using Native MSDTC Protocol = 0,
Outbound Distributed Transactions using Native MSDTC Protocol = 0,
Transaction Internet Protocol (TIP) = 0,
XA Transactions = 0
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Gerry Cornell said:
Wendy
Look in Event Viewer for the error report and tell us the Event ID and
Source.
Make an exact note of the precise text of any error message. Minor
discrepancies can
make it harder to search for information about the error message.
You can access Event Viewer by selecting Start, Administrative Tools,
Event Viewer.
When researching the meaning of the error, information regarding Event
ID, Source
and Description are important.
HOW TO: View and Manage Event Logs in Event Viewer in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;308427&Product=winxp
A tip for posting copies of Error Reports! Run Event Viewer and double
click on the
error you want to copy. In the window, which appears is a button
resembling two
pages. Double click the button and close Event Viewer. Now start your
message
(email) and do a paste into the body of the message. This will paste the
info from the
Event Viewer Error Report complete with links into the message. Make
sure this is
the first paste after exiting from Event Viewer.
--
Hope this helps.
Gerry
~~~~~~~~~~~~~~~~~~~~~~~~
FCA
Using invalid email address
Stourport, Worcs, England
Enquire, plan and execute.
~~~~~~~~~~~~~~~~~~~~~~~~
Please tell the newsgroup how any
suggested solution worked for you.
~~~~~~~~~~~~~~~~~~~~~~~~
