Error Code

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I keep getting the "blue screen". It tells me that Windows has encountered an
error and has to be shut down to prevent damage. Then it says:
BUGCODE_USB_DRIVER
STOP
0x000000fe (0x00000005, 0x10330035, 0x817453f0)

I tried re-installing my drivers from the recovery disc and it still does
this. I had been having some issues with my HP all-in-one printer so I turned
it off unless I need to print. But the computer still does this.

I sure hope someone can help me. Thanks.
 
bubbie said:
I keep getting the "blue screen". It tells me that Windows has encountered an
error and has to be shut down to prevent damage. Then it says:
BUGCODE_USB_DRIVER
STOP
0x000000fe (0x00000005, 0x10330035, 0x817453f0)

I tried re-installing my drivers from the recovery disc and it still does
this. I had been having some issues with my HP all-in-one printer so I turned
it off unless I need to print. But the computer still does this.

I sure hope someone can help me. Thanks.
Click to expand...

Press F8 during the early boot phase, then try to boot into
Safe Mode or Last Known Good Configuration, then report
the result here.
 
bubbie said:
I keep getting the "blue screen". It tells me that Windows has encountered an
error and has to be shut down to prevent damage. Then it says:
BUGCODE_USB_DRIVER
STOP
0x000000fe (0x00000005, 0x10330035, 0x817453f0)

I tried re-installing my drivers from the recovery disc and it still does
this. I had been having some issues with my HP all-in-one printer so I turned
it off unless I need to print. But the computer still does this.

I sure hope someone can help me. Thanks.
Click to expand...

See my reply to your earlier posting to this same newsgroup about the
same problem.

Your issue is hardware related and driver updates will not help.

For future reference please remember that these newsgroups circulate
worldwide and the volunteers who provide the advice and assistance on
them are not always available. Many only have time to check the
postings once a day. So you should allow at least 24 hours for
replies to come to your first message before reposting the same
request again as a new item.

Good luck

Ron Martell Duncan B.C. Canada
--
Microsoft MVP (1997 - 2006)
On-Line Help Computer Service
http://onlinehelp.bc.ca
Syberfix Remote Computer Repair

"Anyone who thinks that they are too small to make a difference
has never been in bed with a mosquito."
 
Back
Top