F
Faz
First time to print photos......am I on the right track? Suggestions
appreciated.
Chuck.
appreciated.
Chuck.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
F
Frank Arthur
You've picked the ideal choice for printing photos.
F
Frank Arthur
To begin with don't deviate from the basics during the learning phase. Use
only Epson inks and only Epson Premium Photo Glossy.
You haven't mentioned the photo software you will be using to make prints
with?
only Epson inks and only Epson Premium Photo Glossy.
You haven't mentioned the photo software you will be using to make prints
with?
M
mark_digital©
Go ahead. Some people have to go through hell to appreciate heaven.Faz said:First time to print photos......am I on the right track? Suggestions
appreciated.
Chuck.
E
Ed Ruf (REPLY to E-MAIL IN SIG!)
Go ahead. Some people have to go through hell to appreciate heaven.
Now you're turning into a mustratite.
M
mark_digital©
Ed Ruf (REPLY to E-MAIL IN SIG!) said:Now you're turning into a mustratite.
People aren't thinking straight this time of year. Quick, let's get
something for under the tree, blah blah blah.
F
ftran999
Faz said:First time to print photos......am I on the right track? Suggestions
appreciated.
Chuck.
I would suggest investing in a good monitor calibration system. That way
your prints will come out indentical to what you see on your monitor.
Personally I use Spyder2 by Colorvision, but others should do just as well.
B
bmoag
High end Epson printers like the R800 are unforgiving of calibration/color
management errors.
A printer like this often seems worse than lower end printers if you do not
calibrate your monitor with an external device and learn how to use color
management.
On the other hand, if you understand or are willing to learn how to do
things properly, you may be astounded at the quailty of images you can print
even from humble image capture devices.
management errors.
A printer like this often seems worse than lower end printers if you do not
calibrate your monitor with an external device and learn how to use color
management.
On the other hand, if you understand or are willing to learn how to do
things properly, you may be astounded at the quailty of images you can print
even from humble image capture devices.
M
measekite
Use only Epson ink for best results and a clog free printhead.
A
Arthur Entlich
Yeap, its Burt and I that have a problem, eh... what possible value was
that statement?
Art
that statement?
Art
A
Arthur Entlich
The R800 is designed with some specific targets in mind.
1) It uses pigment colorant inks, which provide greater archival result.
2) Since pigment inks can provide a slightly narrow gamut (color range)
this printer adds red and blue ink to the usual Cyan, Magenta and
Yellow, to provide wider red and blue color blends.
3) Since pigment inks tend to leave a surface residue that varies in
glossiness based upon the density of the ink layer, this printer offers
a high gloss solution to even the gloss out when using the Ultragloss
Ultrachrome inks.
This printer is a bit more costly to run because it requires the glossy
optimized coating, and specialty inks.
Art
1) It uses pigment colorant inks, which provide greater archival result.
2) Since pigment inks can provide a slightly narrow gamut (color range)
this printer adds red and blue ink to the usual Cyan, Magenta and
Yellow, to provide wider red and blue color blends.
3) Since pigment inks tend to leave a surface residue that varies in
glossiness based upon the density of the ink layer, this printer offers
a high gloss solution to even the gloss out when using the Ultragloss
Ultrachrome inks.
This printer is a bit more costly to run because it requires the glossy
optimized coating, and specialty inks.
Art
M
mark_digital©
Arthur Entlich said:Yeap, its Burt and I that have a problem, eh... what possible value was
that statement?
Art
Your mind is working OT. hehehe
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.