eMachine users, please? Especially T2984

[Ken Knecht]

I have an eMachine T2984. I emailed eMachine about this but received no
response.

1: What is the key to hold down to boot into Safe mode? I tried the usual
ones.

2: What key should be held down to access the BIOS? I tried the usual
ones. There is no message on the monitor while booting as is usual.

TIA

 

[Bruce Chambers]

I have an eMachine T2984. I emailed eMachine about this but received no
response.

1: What is the key to hold down to boot into Safe mode? I tried the usual
ones.



2: What key should be held down to access the BIOS? I tried the usual
ones. There is no message on the monitor while booting as is usual.

In the extremely unlikely event that your PC's manual or the
motherboard manufacturer's web site doesn't contain the needed
information, try one or more of the following:

How do I access my computer's setup (BIOS)
http://www.iomega.com/support/documents/2157.html

Wim's BIOS Page
http://www.wimsbios.com/

Accessing Motherboard BIOS
http://www.michaelstevenstech.com/bios_manufacturer.htm


--

Bruce Chambers

Help us help you:



You can have peace. Or you can have freedom. Don't ever count on having
both at once. - RAH

 

[Rick \Nutcase\ Rogers]

Hi,

1) How to start in Safe mode:
http://www.rickrogers.org/fixes.htm#Safe mode

2) <delete>, and it must be done shortly after the system is powered on and
before Windows begins to load. Press <escape> first at the splash screen to
see the instructions.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP

Associate Expert - WindowsXP Expert Zone

Windows help - www.rickrogers.org