dvd issue

[randallatha]

Hi I'm new here I hope I'm in the right area, I have a lite on dvd-rw drive lh-16w1p and I use nero ans windvd 3 and dvdflick , every time i use windvd it wont burn and nero wont burn and the same for dvd flick heres the dvd flick error log.


DVD Flick error log
Error number 0 from :
*** Project info
EncodingProfile 2
ThreadCount 1
TwoPassEncode 0
OverScan 0, 2.2
*** Project sources
c:\documents and settings\compaq_owner\my documents\dvd\dvd\video_ts\vts_01_1.vob
IsAVI False
TimeStamp 9/2/2007 8:59:53 PM
Stream 0 (2)
Duration 3662.7
StartTime 0.213367
Compression mpeg2video
BitRate 2153
Index 0
720x480 29.97 FPS
DisplayAR 1.777778
SourceAR 1.5
Stream 1 (1)
Duration 3662.7
StartTime 0.213367
Compression ac3
BitRate 192
Index 1
Channels 2
SampleRate 48000
Delay 0
c:\documents and settings\compaq_owner\my documents\dvd\dvd\video_ts\vts_01_2.vob
IsAVI False
TimeStamp 9/2/2007 9:00:20 PM
Stream 0 (2)
Duration 2769.5
StartTime 3662.965
Compression mpeg2video
BitRate 1490
Index 0
720x480 29.97 FPS
DisplayAR 1.777778
SourceAR 1.5
Stream 1 (1)
Duration 2769.5
StartTime 3662.965
Compression ac3
BitRate 192
Index 1
Channels 2
SampleRate 48000
Delay 0
*** dvdflick.log
9:58:29 PM: DVD Flick 1.2.1.4 build 393
9:58:29 PM: Calculating stream sizes...
9:58:29 PM: Disc space used : 2617905 KB
9:58:29 PM: Average bitrate : 5125 Kbit/s
9:58:29 PM: Total duration : 1:47:12 hours
9:58:29 PM: 2 title(s).
9:58:29 PM: Using Normal encoding profile.
9:58:29 PM: Encoding to ntsc-dvd
9:58:29 PM: Encoding video...
9:58:29 PM: Title 0, source 0
9:58:29 PM: Source : c:\documents and settings\compaq_owner\my documents\dvd\dvd\video_ts\vts_01_1.vob
9:58:29 PM: Properties : 720x480, 1.5:1, 29.97 FPS, mpeg2video, 3662.7 seconds
9:58:29 PM: Target BitRate : 3000 Kbit\s
9:58:29 PM: Source matches target format, not recompressing
9:58:29 PM: C:\Program Files\DVD Flick\ffmpeg.exe -i "c:\documents and settings\compaq_owner\my documents\dvd\dvd\video_ts\vts_01_1.vob" -vcodec copy -an -threads 1 -fflags genpts -strict 2 -f mpeg2video "C:\Documents and Settings\Compaq_Owner\My Documents\DVD\0.0.m2v" -map 0:0
*** ffmpeg_video_title0_source0_pass0.txt
-i "c:\documents and settings\compaq_owner\my documents\dvd\dvd\video_ts\vts_01_1.vob" -vcodec copy -an -threads 1 -fflags genpts -strict 2 -f mpeg2video "C:\Documents and Settings\Compaq_Owner\My Documents\DVD\0.0.m2v" -map 0:0
FFmpeg version SVN-rUNKNOWN, Copyright (c) 2000-2007 Fabrice Bellard, et al.
configuration: --enable-memalign-hack --enable-liba52 --enable-libfaad --enable-libgsm --enable-libdts --enable-gpl --enable-w32threads --enable-swscaler --disable-ffplay --disable-ffserver --disable-encoders --enable-encoder=mjpeg --enable-encoder=mpeg2video --enable-encoder=ac3 --enable-demuxers --disable-muxers --enable-muxer=ac3 --enable-muxer=image2 --enable-muxer=mpeg2dvd --enable-muxer=mpeg2video
libavutil version: 49.4.0
libavcodec version: 51.40.4
libavformat version: 51.12.1
built on May 6 2007 11:24:12, gcc: 4.1.2
c:\documents and settings\compaq_owner\my documents\dvd\dvd\video_ts\vts_01_1.vob: I/O error occured
Usually that means that input file is truncated and/or corrupted.

*** Project destination folder
dvdflick.log 1012 Text Document
errorlog.txt 0 Text Document
ffmpeg_video_title0_source0_pass0.txt 1062 Text Document
*** Drives
C - PRESARIO
DriveType 2
FileSystem NTFS
AvailableSpace 48649
FreeSpace 48649
TotalSize 69100
D - PRESARIO_RP
DriveType 2
FileSystem FAT32
AvailableSpace 350
FreeSpace 350
TotalSize 7195
E - not ready
F - not ready
G - not ready
H - not ready
I - not ready
J - not ready
[/code]
I'm running xp sp2 80 gig hard drive
anyone?

 

[AbsoluteKevster]

Try putting the DVD data files on a different partition to C:
Also make sure that no other applications are running when you burn the DVD.

Run a simulation until you reach a successful burn.

If you can't get a successful burn, make sure you have the latest updates for your burner and software applications.

Good Luck!
...and Welcome aboard the PCReview Forum
Kev