During setup: unknown hard error

M

MonkeyMan

During any installation of 2K as setup is copying files
over I get " stop: C0000145 unknown hard error". I can't
find any refrence to it any where.

Sys is:

ASUS A7V-E
AMD Duron 1300
128MB PC133
Diamond III S540 32MB AGP
Seagate 40 GIG

all have less than one year but the video. All componants
test out fine over and over...WTF?!
 
D

Dave Patrick

You didn't mention the drive controller (possibly SCSI, or ultra DMA, or
ATA100), but you may need to boot the Windows 2000 setup disks or CD-Rom and
*F6* very early and very important (at setup is inspecting your system) in
the setup to prevent drive controller detection, and select S to specify
additional drivers. Then later you'll be prompted to insert the Windows 2000
driver for your drive's controller in drive "A"

If you wait and then S to specify additional drivers, then it may be too
late as Windows 2000 Setup at this point may have already assigned the
resources your drive's controller is wanting to use.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top