C
Cliff Stephens
Can anyone help me with Windows XP dual boot problem?
Started with PC with MS Windows 98SE on C drive
Installed new additional HDD and installed Windows XP Proff SP2. Did this by
physically disconnecting C HDD and installed on new HDD. Since C
disconnected the system could not find 98SE so XP is on HDD J
C is FAT 32. J is NTFS (D is another partition of C HDD; E, F etc are SCSI
HDDs)
XP is fine
I can boot to 98 SE by changing BIOS to boot from second HDD
Trying to set up Boot.ini to easily boot to 98SE
Have read everything on internet and MS KB but cannot get 98SE to boot from
Boot.ini
Have set up details of both HDD sectors in Boot.ini and tried to point to
98SE by C:\ WINDOWS or just C:\ but to no avail. Recovery console does not
find 98SE.
When 98SE is selected in Boot.ini selection screen at startup system just
hangs
Pressing F8 gives obscure message about missing Hal.dll
BOOT.INI is-
[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP
Professional" /noexecute=optin /fastdetect
C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons
multi(0)disk(0)rdisk(1)partition(1)\C:\="Windows 98SE" /Win95
C HDD is FAT 32
J HDD is NTFS
Started with PC with MS Windows 98SE on C drive
Installed new additional HDD and installed Windows XP Proff SP2. Did this by
physically disconnecting C HDD and installed on new HDD. Since C
disconnected the system could not find 98SE so XP is on HDD J
C is FAT 32. J is NTFS (D is another partition of C HDD; E, F etc are SCSI
HDDs)
XP is fine
I can boot to 98 SE by changing BIOS to boot from second HDD
Trying to set up Boot.ini to easily boot to 98SE
Have read everything on internet and MS KB but cannot get 98SE to boot from
Boot.ini
Have set up details of both HDD sectors in Boot.ini and tried to point to
98SE by C:\ WINDOWS or just C:\ but to no avail. Recovery console does not
find 98SE.
When 98SE is selected in Boot.ini selection screen at startup system just
hangs
Pressing F8 gives obscure message about missing Hal.dll
BOOT.INI is-
[boot loader]
timeout=10
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP
Professional" /noexecute=optin /fastdetect
C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons
multi(0)disk(0)rdisk(1)partition(1)\C:\="Windows 98SE" /Win95
C HDD is FAT 32
J HDD is NTFS