Dual boot question

[Linn Kubler]

Hi,

Is it possible to setup dual boot, in this case, Windows 2000 Pro and DOS 6,
after Windows 2000 has already been installed? I have a computer with
Windows 2000 running and now I want to run DOS on it as well. I would
rather not have to reinstall Windows 2000 if I don't have to.

Thanks in advance,
Linn

 

[Dave Patrick]

This article may help.

http://support.microsoft.com/default.aspx?scid=kb;[LN];217210

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Hi,
|
| Is it possible to setup dual boot, in this case, Windows 2000 Pro and DOS
6,
| after Windows 2000 has already been installed? I have a computer with
| Windows 2000 running and now I want to run DOS on it as well. I would
| rather not have to reinstall Windows 2000 if I don't have to.
|
| Thanks in advance,
| Linn
|
|

 

[Pegasus \(MVP\)]

Hi,

Is it possible to setup dual boot, in this case, Windows 2000 Pro and DOS 6,
after Windows 2000 has already been installed? I have a computer with
Windows 2000 running and now I want to run DOS on it as well. I would
rather not have to reinstall Windows 2000 if I don't have to.

Thanks in advance,
Linn

Yes, you can do this but the solution depends on the number
and type of partitions you currently have, e.g. FAT, FAT32
or NTFS. Please supply details.

 

[Linn Kubler]

Yes, you can do this but the solution depends on the number
and type of partitions you currently have, e.g. FAT, FAT32
or NTFS. Please supply details.

It does so happen that there are two partitions defined on this hard drive.
Both are NTFS but I'm not using the second partition at all and could change
it, if that's possible without destroying both. It's been so long since
I've had to worry about those details I don't quite remember. The second
partition is 10GB, is that too big for DOS?

Installing a second hard drive is also possible, I have a couple old ones
lying around.

Thanks,
Linn

 

[Linn Kubler]

Dave, thanks for the info. I read that one earlier today. Wish I'd known I
needed this configuration when I built that system. I'm sure it would have
been much easier to setup the dual boot by installing in the correct order.

Thanks,
Linn

 

[Dave Patrick]

You're welcome.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Dave, thanks for the info. I read that one earlier today. Wish I'd known
I
| needed this configuration when I built that system. I'm sure it would
have
| been much easier to setup the dual boot by installing in the correct
order.
|
| Thanks,
| Linn

 

[Pegasus \(MVP\)]

It does so happen that there are two partitions defined on this hard drive.
Both are NTFS but I'm not using the second partition at all and could change
it, if that's possible without destroying both. It's been so long since
I've had to worry about those details I don't quite remember. The second
partition is 10GB, is that too big for DOS?

Installing a second hard drive is also possible, I have a couple old ones
lying around.

Thanks,
Linn

Having a second drive lying about makes things much, much easier.
Here is what you do, in this order:

1. Download a copy of the XOSL boot manager. It's free.
2. Disconnect your primary hard disk.
3. Install the second hard disk as the primary master.
4. Create a FAT partition on it and install DOS.
5. Copy and unzip XOSL into an XOSL directory on this disk.
6. Create a DOS boot diskette.
7. Connect your main disk the primary master.
8. Connect your second disk as a slave.
9. Boot the machine with your DOS boot diskette.
10. Install XOSL. Make very, very sure to install it in the
existing DOS partition on the slave drive. Under no
circumstances install it in a dedicated partition, e.g. in
your Win2000 partition.
11. Boot the machine with your hard disk.
12. Add the two OSs to the XOSL selection menu.

That's all!
If you ever wish to get rid of XOSL, just boot the machine
with your Win2000 CD, get into the Recovery Console and
run this command:
fixmbr