B
BobL
I used Ghost 9 to clone a 60 GB failing hard drive to a new 60 GB hard
drive. Ghost now can not see the hard drive. Everything else is
running fine. Here is my problem that Symantec can't help with.
After running PowerQuest PartitionInfo I get errors. I don't know if
the old hard drive had them or if I created them durring the
transfer. Ghost could see my old hard drive though.
How can I repair the Disk Geometry without loosing my data? Here is
what PowerQuest PartitionInfo is telling me.
PowerQuest PartitionInfo 8.0 -- Windows NT/2000 Version
Date Generated: 03/09/05 11:52:52
Copyright (c)1994-2002, PowerQuest Corporation
Permission is granted for this utility to be freely copied so long
as it is not modified in any way. All other rights are reserved.
PowerQuest, makers of PartitionMagic(r), Drive Image(tm), and
DriveCopy(tm), can be reached at:
Voice: 801-437-8900
Fax: 801-226-8941
Web site: http://www.powerquest.com/support/
E-mail: (e-mail address removed)
General System Information:
Total Physical Memory (bytes): 1,610,072,064
Used Physical Memory: (bytes): 483,172,352
Maximum Page File Size: (bytes): 3,634,782,208
Current Page File Size: (bytes): 524,382,208
===========================================================================================================
Disk Geometry Information for Disk 1: 7475 Cylinders, 255 Heads,
63 Sectors/Track
System PartSect # Boot BCyl Head Sect FS ECyl Head
Sect StartSect NumSects
===========================================================================================================
0 0 80 0 1 1 07 1023 254
63 63 120,101,877
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 0 80 0 1 1 07 7475 254 63 63
120101877
Error #109: Partition ends after end of disk.
ucEndCylinder (7475) must be less than 7475.
===========================================================================================================
Partition Information for Disk 1: 58,635.7 Megabytes
Volume PartType Status Size MB PartSect #
StartSect TotalSects
===========================================================================================================
C: NTFS Pri,Boot 58,643.5 0 0
63 120,101,877
===========================================================================================================
Boot Record for drive C: (Drive: 1, Starting sector: 63, Type:
NTFS)
===========================================================================================================
1. Jump: EB 52 90
2. OEM Name: NTFS
3. Bytes per Sector: 512
4. Sectors per Cluster: 8
5. Reserved Sectors: 0
6. Number of FATs: 0
7. Root Dir Entries: 0
8. Total Sectors: 0
9. Media Descriptor: 0xF8
10. Sectors per FAT: 0
11. Sectors per Track: 63 (0x3F)
12. Number of Heads: 255 (0xFF)
13. Hidden Sectors: 63 (0x3F)
14. Total Sectors (>32MB): 0 (0x0)
15. Unused: 0x80008000
16. Total NTFS Sectors: 120101876
17. MFT Start Cluster: 4
18. MFT Mirror Start Clust: 7325636
19. Clusters per FRS: 246
20. Clusters per Index Blk: 1
21. Serial Number: 0x3CF05A34F059F51C
22. Checksum: 0 (0x0)
23. Boot Signature: 0xAA55
PLEASE HELP
drive. Ghost now can not see the hard drive. Everything else is
running fine. Here is my problem that Symantec can't help with.
After running PowerQuest PartitionInfo I get errors. I don't know if
the old hard drive had them or if I created them durring the
transfer. Ghost could see my old hard drive though.
How can I repair the Disk Geometry without loosing my data? Here is
what PowerQuest PartitionInfo is telling me.
PowerQuest PartitionInfo 8.0 -- Windows NT/2000 Version
Date Generated: 03/09/05 11:52:52
Copyright (c)1994-2002, PowerQuest Corporation
Permission is granted for this utility to be freely copied so long
as it is not modified in any way. All other rights are reserved.
PowerQuest, makers of PartitionMagic(r), Drive Image(tm), and
DriveCopy(tm), can be reached at:
Voice: 801-437-8900
Fax: 801-226-8941
Web site: http://www.powerquest.com/support/
E-mail: (e-mail address removed)
General System Information:
Total Physical Memory (bytes): 1,610,072,064
Used Physical Memory: (bytes): 483,172,352
Maximum Page File Size: (bytes): 3,634,782,208
Current Page File Size: (bytes): 524,382,208
===========================================================================================================
Disk Geometry Information for Disk 1: 7475 Cylinders, 255 Heads,
63 Sectors/Track
System PartSect # Boot BCyl Head Sect FS ECyl Head
Sect StartSect NumSects
===========================================================================================================
0 0 80 0 1 1 07 1023 254
63 63 120,101,877
Info: End C,H,S values were large drive placeholders.
Actual values are:
0 0 80 0 1 1 07 7475 254 63 63
120101877
Error #109: Partition ends after end of disk.
ucEndCylinder (7475) must be less than 7475.
===========================================================================================================
Partition Information for Disk 1: 58,635.7 Megabytes
Volume PartType Status Size MB PartSect #
StartSect TotalSects
===========================================================================================================
C: NTFS Pri,Boot 58,643.5 0 0
63 120,101,877
===========================================================================================================
Boot Record for drive C: (Drive: 1, Starting sector: 63, Type:
NTFS)
===========================================================================================================
1. Jump: EB 52 90
2. OEM Name: NTFS
3. Bytes per Sector: 512
4. Sectors per Cluster: 8
5. Reserved Sectors: 0
6. Number of FATs: 0
7. Root Dir Entries: 0
8. Total Sectors: 0
9. Media Descriptor: 0xF8
10. Sectors per FAT: 0
11. Sectors per Track: 63 (0x3F)
12. Number of Heads: 255 (0xFF)
13. Hidden Sectors: 63 (0x3F)
14. Total Sectors (>32MB): 0 (0x0)
15. Unused: 0x80008000
16. Total NTFS Sectors: 120101876
17. MFT Start Cluster: 4
18. MFT Mirror Start Clust: 7325636
19. Clusters per FRS: 246
20. Clusters per Index Blk: 1
21. Serial Number: 0x3CF05A34F059F51C
22. Checksum: 0 (0x0)
23. Boot Signature: 0xAA55
PLEASE HELP