disk errors in event log

[WhoKnows]

Sorry for the cross post, not sure where this should go...

I just got a new rig that has a 160gb Maxtor SATA HD. I installed a 2nd
160 IDE drive mainly for backups, (a WD 160GB $40 special from Best
Buy). I've been getting the errors below in the system portion of the
event log indicating some type of timeout.

Type error event-id 15
The device, \Device\Harddisk1\D, is not ready for access yet.

I've also changed the cable, Swapped the IDE channel with the DVD burner
but the problem follows the drive. I've even replaced the drive
thinking it was defective but the errors persist. Diags on the drive
turn up nothing.

I don't see any problem using the drive, but I'm wondering what these
errors are indicating and if I should be concerned.

Thanks for any replies!

System specs:

--
Thermaltake 3000BNA Black w/450W PS
ASUS A8V deluxe
Athlon 64 3500+ socket 939
1GB (x2 512MB) Dual Channel PC-3200 DDR 400 Kingston RAM
Radeon X800 XT 256MB AGP
Creative Sound Blaster® Audigy® 2 ZS
160GB MAXTOR® 7200 RPM SATA w/8MB Cache
160GB WD 7200 RPM IDE w/8MN Cache
Sony DWD22A 16x DVD+/-RW Double Layer

check it out at http://www.widowpc.com/

 

[Kelly]

http://groups.google.com/groups?hl=...earch&meta=group=microsoft.public.windowsxp.*

--
All the Best,
Kelly (MS-MVP)

Troubleshooting Windows XP
http://www.kellys-korner-xp.com


Sorry for the cross post, not sure where this should go...

I just got a new rig that has a 160gb Maxtor SATA HD. I installed a 2nd
160 IDE drive mainly for backups, (a WD 160GB $40 special from Best
Buy). I've been getting the errors below in the system portion of the
event log indicating some type of timeout.

Type error event-id 15
The device, \Device\Harddisk1\D, is not ready for access yet.

I've also changed the cable, Swapped the IDE channel with the DVD burner
but the problem follows the drive. I've even replaced the drive
thinking it was defective but the errors persist. Diags on the drive
turn up nothing.

I don't see any problem using the drive, but I'm wondering what these
errors are indicating and if I should be concerned.

Thanks for any replies!

System specs:

--
Thermaltake 3000BNA Black w/450W PS
ASUS A8V deluxe
Athlon 64 3500+ socket 939
1GB (x2 512MB) Dual Channel PC-3200 DDR 400 Kingston RAM
Radeon X800 XT 256MB AGP
Creative Sound Blaster® Audigy® 2 ZS
160GB MAXTOR® 7200 RPM SATA w/8MB Cache
160GB WD 7200 RPM IDE w/8MN Cache
Sony DWD22A 16x DVD+/-RW Double Layer

check it out at http://www.widowpc.com/

 

[Guest]

Sorry for the cross post, not sure where this should go...

I just got a new rig that has a 160gb Maxtor SATA HD. I installed a 2nd
160 IDE drive mainly for backups, (a WD 160GB $40 special from Best
Buy). I've been getting the errors below in the system portion of the
event log indicating some type of timeout.

Type error event-id 15
The device, \Device\Harddisk1\D, is not ready for access yet.

I've also changed the cable, Swapped the IDE channel with the DVD burner
but the problem follows the drive. I've even replaced the drive
thinking it was defective but the errors persist. Diags on the drive
turn up nothing.

I don't see any problem using the drive, but I'm wondering what these
errors are indicating and if I should be concerned.

Thanks for any replies!

System specs:

--
Thermaltake 3000BNA Black w/450W PS
ASUS A8V deluxe
Athlon 64 3500+ socket 939
1GB (x2 512MB) Dual Channel PC-3200 DDR 400 Kingston RAM
Radeon X800 XT 256MB AGP
Creative Sound Blaster® Audigy® 2 ZS
160GB MAXTOR® 7200 RPM SATA w/8MB Cache
160GB WD 7200 RPM IDE w/8MN Cache
Sony DWD22A 16x DVD+/-RW Double Layer

check it out at http://www.widowpc.com/

 

[Guest]

Hatte dasselbe Problem
Habe von VIA http://www.viaarena.com/default.aspx?PageID=2 den neuen Treiber
VIA_RAID V410a installiert, Fehler ist weg