Default Gateway when connect to VPN

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hi All,

I am using VPN connection to my central office, and working with Terminal
Services and other applications.

When I connect to VPN trought Internet, a default gateway is created in my
route list. Then I need create additional routes to access several
applications with the command route add ip_address gateway. This gateway is
different each time (the last section of ip address only). How I can tell to
route command, use gateway that start with 10.86.10.X (always change the
last section).

Please let me know, if exist other ways please let me know.
 
There is not easy way if the gateway is different. You may try to create a batch file with route command and have the batch file ask you to enter the gateway IP each time you establish the VPN.

Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Hi All,

I am using VPN connection to my central office, and working with Terminal
Services and other applications.

When I connect to VPN trought Internet, a default gateway is created in my
route list. Then I need create additional routes to access several
applications with the command route add ip_address gateway. This gateway is
different each time (the last section of ip address only). How I can tell to
route command, use gateway that start with 10.86.10.X (always change the
last section).

Please let me know, if exist other ways please let me know.
 
Back
Top