DDR & DDR2

[Aamir]

Is there any board that support both memory modules. i mean one or
more slot for DDR and DDR2.

 

[paulmd]

Is there any board that support both memory modules. i mean one or
more slot for DDR and DDR2.

Yes.

http://www.dfi.com.tw/Product/xx_pr....jsp?PRODUCT_ID=3201&CATEGORY_TYPE=MB&SITE=NA

Don't get one. They cost more, and you likely can't use ddr and ddr2
simultaneously.

 

[pen]

Yes.

http://www.dfi.com.tw/Product/xx_pr....jsp?PRODUCT_ID=3201&CATEGORY_TYPE=MB&SITE=NA

Don't get one. They cost more, and you likely can't use ddr and ddr2
simultaneously.

You definitely can not use them simultaneously. RTFM
http://www.dfi.com.tw/Support/Downl....jsp?PRODUCT_ID=3201&CATEGORY_TYPE=MB&SITE=NA

 

[GT]

Is there any board that support both memory modules. i mean one or
more slot for DDR and DDR2.

Go to google and search for PT880 Ultra motherboard. The PT880 chipset
offers AGP and PCI-e graphics, 775 processor sockets and DDR1 and DDR2
slots - cheap upgrade route for more processor power as you can keep your
AGP card and DDR memory and a little future proofing as you can upgrade to
DDR2 667 or 800 and a PCI-e graphics later.

 

[jameshanley39]

Is there any board that support both memory modules. i mean one or
more slot for DDR and DDR2.

i'll just add that DDR and DDR2 have notches in a different place.

( cut and key in different place )

Straying further off topic
I heard term cut and key used by a guy selling AGP cards. Aside from
AGP - The key is on the MBRD connector, the cut on the RAM PCB. Here's
an AGP page that uses the term.
http://www.playtool.com/pages/agpcompat/agp.html
And further off topic - I know the issue of RAM PCB rarely comes up
Googling google groups for RAM PCB cheap may be of interest.