J
Jimbo
I have an Adaptec 2120s raid card which feeds two scsi hard drives in raid
0(stripe) as Drive C
I also have an Adaptec 39320 Scsi card which runs two hard drives each with
XP (Drives G and H) on.
Normally, if they where all scsci I would be able to boot to any of the 3
os's by virtue of a boot ini selection menu at boot time.
However, as one OS is cofigured in raid, and the other two in scsi, with the
runtime bios enabled on
both these two cards, what I need is a custom boot ini
that will give me the option of selecting any of the 3 hard drives at boot
time.
If the 'standard' boot ini on Drive C is left in when the two cards run,
they conflict and everything comes to a halt.
Adaptec tell me that a custom boot ini will solve the problem.
Does any one have any idea as to what the custom boot ini should like?
Thanks
Jim
0(stripe) as Drive C
I also have an Adaptec 39320 Scsi card which runs two hard drives each with
XP (Drives G and H) on.
Normally, if they where all scsci I would be able to boot to any of the 3
os's by virtue of a boot ini selection menu at boot time.
However, as one OS is cofigured in raid, and the other two in scsi, with the
runtime bios enabled on
both these two cards, what I need is a custom boot ini
that will give me the option of selecting any of the 3 hard drives at boot
time.
If the 'standard' boot ini on Drive C is left in when the two cards run,
they conflict and everything comes to a halt.
Adaptec tell me that a custom boot ini will solve the problem.
Does any one have any idea as to what the custom boot ini should like?
Thanks
Jim