CPU problem

  • Thread starter Thread starter Kevin
  • Start date Start date
K

Kevin

this error appears when i try to boot up windows XP
"New CPU installed! Please enter setup to configure your system."

"Press F1 to enter setup"

"Press F2 to load default values and continue"

ASUS P5B + E2200

Any one may help?

thanks
 
F1 would probably be the BIOS,which you could enter,exit page,select "load
optimal settings" or load default settings,save and exit BIOS.Usually the
board
is pre-programmed as to which settings it will use,you might even enter BIOS,
save & exit,w/o making any changes at all.
 
Kevin said:
this error appears when i try to boot up windows XP
"New CPU installed! Please enter setup to configure your system."

"Press F1 to enter setup"

"Press F2 to load default values and continue"

ASUS P5B + E2200
Click to expand...

If you didn't install a new processor, it may be as simple as replacing the
motherboard's CMOS battery. You will need to enter setup (F1 in your case)
afterwards to set the time/date. Unless you customized your BIOS, you won't
need to do anything else in there. Replacing the battery is a cheap and
easy troubleshooting step so do that first. If that doesn't solve the
issue, post back.

How To Replace The CMOS Battery In Your PC -
http://www.liverepair.com/encyclopedia/articles/cmosreplace.asp
How to replace the CMOS battery -
http://www.computerhope.com/issues/ch000239.htm
When was the last time you thought about the battery in your PC? -
http://home.i-plus.net/jtmurphy/cmos.htm

Malke
 
Back
Top