Hi Jimnic,
Good work on your part, let me ask you first do you have these products or
you had it before and uninstalled?:
VIA Technologies
Giga-Byte Technology
OrangeWare Corporation
USB 2.0 Enhanced Host Controller Driver
c:\ windows\ system32\ drivers\ ousbehci.sys
HKEY_LOCAL_MACHINE\ SYSTEM\ CurrentControlSet\ Services\ ousbehci
OrangeWare USB Enhanced Host Controller Service
Try to rename it in both the Registry and the System32\drivers here to say
ousbehci.old and Reboot do you get the error message or any of your USB
devices/application complain?.
If no joy try the clean boot given earlier in the link.
HTH.
nass
===
www.nasstec.co.uk
:
Thanks again Nass.
I must admit I am reluctant to uninstall and reinstall my USB drivers since
all are operating well. I have looked at all aspects of USBs on my system and
can find no problems.
I do have programmes for two cameras installed, which I use when downloading
photos. I have tried both of these today and they are working as they should.
Do you have any thoughts on the "OWC" aspect of the error message? I take
this to be something to do with Microsoft Office, that is " Office Web
Components"
I do have Office 2000 installed but as far as I am aware, do not use the
Office Web Component facility. I don't even know what it does!
Basically I can find no "service" which corresponds to any part of the error
message although, as I have said, the error string appears in the registry
under the service "ousbehci" . I wonder if it is meant to be there.
Here is the copy from the Event Log:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 21/03/2007
Time: 11:43:21
User: N/A
Computer: J-C4M6Z7SL8YWL6
Description:
The %OWC_USBEHCD.DeviceDesc% service failed to start due to the following
error:
The service cannot be started, either because it is disabled or because it
has no enabled devices associated with it.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Regards
Jimnic
:
It is really connected with your USB, did you install any hardware recently?.
Try to have a look in the Event Viewer and double click the Error Messages
(X) to get more info and you can copy and paste in your next post.
What USB devices might you have that are on power saving?
reinstall your USB drivers, not only for the devices, but your chip set
drivers or drivers for your USB adapter.
Try with clean boot and see if that will help:
http://support.microsoft.com/kb/310353
Do you have a program photoshop or a camera program installed?
Let us know.
nass
:
Thanks for your input, Nass.
I did disable the USB enhanced host controller, and unfortunately it tripped
out my ADSL modem! Something to do with disabling USB 2.0 support.
I don't have any other USB hubs other than "root hubs" and most of them are
occupied with printer, scanner, joystick etc. so I am a bit wary about
disabling them.
Thanks
Jimnic
:
:
The following error shows in my system Error Log at every boot-up:-
"The %OWC_USBEHCD.DeviceDesc% service failed to start due to the following
error: The service cannot be started, either because it is disabled or
because it has no enabled devices associated with it."
The error also appears in the Event Log.
I have no problems with my system, and all USB devices are operating
normally.
The entry %OWC_USBEHCD.DeviceDesc% appears in the system registry under a
service called "ousbehci". I believe this may have something to do with an
external USB hub, but I dont have one.
I am operating Windows XP Home, SP2. Athlon XP2400. 512 Mb Ram.
Although the error is not causing any apparent system problems, it is an
irritation and I would like to cure it.
I have searched the web (and the Microsoft sites and web pages!)for similar
problems and have found quite a few with the same script, but never a
solution.
I would be very grateful if someone could offer a solution or even some
advice.
Right click My Computer and Select properties, then click on Hardware tab
then click Device manager.
Scroll and locate the USB and click the Plus [+] sign to expand and see
there USB Hub and Disable from running on the System click [OK] after done
your changes.
Run disk cleanUp and delete your temporary internet files and Reboot does
the Error come back?.
HTH.
Let us know.
nass