Configuring a VPN connection

[Guest]

I would like to configure a VPN between a office based file server and a
mobile machine. Both m/c's are running versions of XP and logins have been
set to allow the remote user to conncet as a properly authenticated member of
group on the offoce m/c.
Problem is I can't set the IP address for the remote machine to connect to.
The office conection is via a dsl setup and I have been given an IP address
for the internet connection by the ISP. After the ISP IP Address I expect to
see a modem (which is also my internal LAN DHCP server) and the IP Address of
the machine I wish to connect to.
If my ISP has given me an IP address 200.200.1.100, my dsl modem is
192.168.1.255 and the machine I wish to connect to is 192.168.1.100 with
subnet mask 255.255.255.0 how does this translate to a VPN configuration?
Any assistance is greatly appreciated.

Andrew

 

[GTS]

Answered in the work_remotely group. That was the right place for this
question. If you inquire in multiple groups, please learn how to cross post
properly.

Multiposting vs Crossposting
http://www.blakjak.demon.co.uk/mul_crss.htm