computer doesn't finish booting to Windows

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

When I boot my computer, the process stops at the bios/info screen and I am
told to strike F1 to continue or F2 to enter setup. I have enabled fast boot
and moved the hard disk to the first sequence but I still can't boot directly
to the OS. Any suggestions? Thanks.
 
Stike F2 and enter Setup. Look for PnP/PCI Configuration>Reset
Configuration Data choose Enable. Save Settings and
Restart.
 
Thanks for the reply. I do not have this option from setup. I can't find any
PnP/PCI Configuration setting at all. This sounds like a reasonable solution
but I can't get there. Any suggestions? Thanks again.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Windows XP Boot Problem 1
Boot Up Problem 2
Help!cant boot from cd 2
Did My Computer Crash? 11
cant boot xp 2
Dell Dimesion not booting 1
I have a serious problem i need help with on my computer 5
XP splash screen crashes, then re-starts, then finishes. 6

Back
Top