J
Joel Kline
I am setting up several new PC's using SATA hard drives
without success. I am using ASUS KV8 SE Deluxe
motherboards with WD 160GB SATA drives. I have attempted
to install more than a dozen times using the downloaded
third-party drivers for VIA and Promise. I have updated
the BIOS, disabled PROMISE RAID, modified the boot
priority. Hard drive has been formatted and partitioned
using WD's Data Lifeguard software. Here is the error
sequence I get on a typical machine when installing
Windows XP Professional.
Error 1 - shows itself when install is 77% complete
"The file wininet.dll was not copied correctly.
The file setup placed on your hard drive is not a valid
windows XP system image. If you are installing from CD,
there may be a problem with the windows XP CD".
Error 2 - shows itself when install is 78% complete
"The file licdll.dll was not copied correctly . . . . "
same as above in Error 1.
Error 3 - Blue Screen
"A problem has been detected and windows has been shut
down to prevent damage to your computer"
BAD_POOL_CALLER
Technical Information:
*** Stop: 0x000000C2 (0x00000040, 0x00000000, 0x80000000,
0x00000000).
Error 4 - Blue Screen on second attempt after first blue
screen
Same above but with different Technical Information:
*** Stop: 0x0000008E (0xC0000005, 0x8059231E, 0xf7DECB08,
0x00000000).
without success. I am using ASUS KV8 SE Deluxe
motherboards with WD 160GB SATA drives. I have attempted
to install more than a dozen times using the downloaded
third-party drivers for VIA and Promise. I have updated
the BIOS, disabled PROMISE RAID, modified the boot
priority. Hard drive has been formatted and partitioned
using WD's Data Lifeguard software. Here is the error
sequence I get on a typical machine when installing
Windows XP Professional.
Error 1 - shows itself when install is 77% complete
"The file wininet.dll was not copied correctly.
The file setup placed on your hard drive is not a valid
windows XP system image. If you are installing from CD,
there may be a problem with the windows XP CD".
Error 2 - shows itself when install is 78% complete
"The file licdll.dll was not copied correctly . . . . "
same as above in Error 1.
Error 3 - Blue Screen
"A problem has been detected and windows has been shut
down to prevent damage to your computer"
BAD_POOL_CALLER
Technical Information:
*** Stop: 0x000000C2 (0x00000040, 0x00000000, 0x80000000,
0x00000000).
Error 4 - Blue Screen on second attempt after first blue
screen
Same above but with different Technical Information:
*** Stop: 0x0000008E (0xC0000005, 0x8059231E, 0xf7DECB08,
0x00000000).