G
Guest
How does one run chkdsk? All I see when I go to system tools is disk cleanup
and disk defragmenter. Also, I take it there is no scandisk with windows xp?
and disk defragmenter. Also, I take it there is no scandisk with windows xp?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
W
Wesley Vogel
Scandisk has been retired. Use Error Checking (chkdsk.exe) in XP.
See below for command line options.
1. In My Computer or Windows Explorer, right-click the drive you want to
check and then click Properties.
2. On the Tools tab, click Check Now.
3. Check both boxes:
Automatically fix file system errors
Runs Chkdsk by using the /f parameter.
[[Specifies whether Windows repairs file-system errors found during disk
checking. All files must be closed for this program to run. If the drive is
currently in use, a message asks if you want to reschedule
the disk checking for the next time you restart your computer. Your drive is
not available to run other tasks while the disk is being checked.]]
Scan for and attempt recovery of bad sectors
Runs Chkdsk by using the /r parameter.
[[Specifies whether Windows repairs file-system errors found during disk
checking, locates bad sectors, and recovers readable information. All files
must be closed for this program to run. If the drive is currently in use, a
message asks if you want to reschedule the disk checking for the next time
you restart your computer. Your drive is not available to run other tasks
while the disk is being checked. If you select this option, you do not need
to select Automatically fix file system errors. Windows fixes any errors on
the disk.]]
A message will popup.
[[The disk check could not be performed because the disk check utility needs
exclusive access to some Windows files on the disk. These files can be
accessed only by restarting Windows. Do you want to schedule this disk check
to occur the next time you restart the computer?]]
Click YES.
Then reboot.
For a look at the chkdsk log.
Open the Event Viewer...
Start | Run | Type: eventvwr | Click OK |
Look in Application | Listed as Information |
Event ID: 1001
Source: Winlogon
[[Description: This includes file system type; drive letter or GUID, and
volume name or serial number to help determine what volume Chkdsk ran
against. Also included is whether Chkdsk ran because a user scheduled it or
because the dirty bit was set.]]
[[When Autochk runs against a volume at boot time it records its output to a
file called Bootex.log in the root of the volume being checked. The Winlogon
service then moves the contents of each Bootex.log file to the Application
Event log.]]
[[This file states whether Chkdsk encountered any errors and, if so,
whether they were fixed.]]
Chkdsk
http://www.microsoft.com/resources/...windows/xp/all/reskit/en-us/prmb_tol_pwfd.asp
Chkdsk
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/chkdsk.mspx
Describes how to use the chkdsk command at the command line.
http://www.microsoft.com/windowsxp/...WINDOWSXP/home/using/productdoc/en/chkdsk.asp
Understanding what CHKDSK does
http://support.microsoft.com/kb/314835/en-us#XSLTH3154121123120121120120
From...
An explanation of the new /C and /I Switches that are available to use with
Chkdsk.exe
http://support.microsoft.com/kb/314835
--
Hope this helps. Let us know.
Wes
MS-MVP Windows Shell/User
In
See below for command line options.
1. In My Computer or Windows Explorer, right-click the drive you want to
check and then click Properties.
2. On the Tools tab, click Check Now.
3. Check both boxes:
Automatically fix file system errors
Runs Chkdsk by using the /f parameter.
[[Specifies whether Windows repairs file-system errors found during disk
checking. All files must be closed for this program to run. If the drive is
currently in use, a message asks if you want to reschedule
the disk checking for the next time you restart your computer. Your drive is
not available to run other tasks while the disk is being checked.]]
Scan for and attempt recovery of bad sectors
Runs Chkdsk by using the /r parameter.
[[Specifies whether Windows repairs file-system errors found during disk
checking, locates bad sectors, and recovers readable information. All files
must be closed for this program to run. If the drive is currently in use, a
message asks if you want to reschedule the disk checking for the next time
you restart your computer. Your drive is not available to run other tasks
while the disk is being checked. If you select this option, you do not need
to select Automatically fix file system errors. Windows fixes any errors on
the disk.]]
A message will popup.
[[The disk check could not be performed because the disk check utility needs
exclusive access to some Windows files on the disk. These files can be
accessed only by restarting Windows. Do you want to schedule this disk check
to occur the next time you restart the computer?]]
Click YES.
Then reboot.
For a look at the chkdsk log.
Open the Event Viewer...
Start | Run | Type: eventvwr | Click OK |
Look in Application | Listed as Information |
Event ID: 1001
Source: Winlogon
[[Description: This includes file system type; drive letter or GUID, and
volume name or serial number to help determine what volume Chkdsk ran
against. Also included is whether Chkdsk ran because a user scheduled it or
because the dirty bit was set.]]
[[When Autochk runs against a volume at boot time it records its output to a
file called Bootex.log in the root of the volume being checked. The Winlogon
service then moves the contents of each Bootex.log file to the Application
Event log.]]
[[This file states whether Chkdsk encountered any errors and, if so,
whether they were fixed.]]
Chkdsk
http://www.microsoft.com/resources/...windows/xp/all/reskit/en-us/prmb_tol_pwfd.asp
Chkdsk
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/chkdsk.mspx
Describes how to use the chkdsk command at the command line.
http://www.microsoft.com/windowsxp/...WINDOWSXP/home/using/productdoc/en/chkdsk.asp
Understanding what CHKDSK does
http://support.microsoft.com/kb/314835/en-us#XSLTH3154121123120121120120
From...
An explanation of the new /C and /I Switches that are available to use with
Chkdsk.exe
http://support.microsoft.com/kb/314835
--
Hope this helps. Let us know.
Wes
MS-MVP Windows Shell/User
In
G
Guest
thank-you very much!!
Wesley Vogel said:Scandisk has been retired. Use Error Checking (chkdsk.exe) in XP.
See below for command line options.
1. In My Computer or Windows Explorer, right-click the drive you want to
check and then click Properties.
2. On the Tools tab, click Check Now.
3. Check both boxes:
 Automatically fix file system errors
Runs Chkdsk by using the /f parameter.
[[Specifies whether Windows repairs file-system errors found during disk
checking. All files must be closed for this program to run. If the drive is
currently in use, a message asks if you want to reschedule
the disk checking for the next time you restart your computer. Your drive is
not available to run other tasks while the disk is being checked.]]
 Scan for and attempt recovery of bad sectors
Runs Chkdsk by using the /r parameter.
[[Specifies whether Windows repairs file-system errors found during disk
checking, locates bad sectors, and recovers readable information. All files
must be closed for this program to run. If the drive is currently in use, a
message asks if you want to reschedule the disk checking for the next time
you restart your computer. Your drive is not available to run other tasks
while the disk is being checked. If you select this option, you do not need
to select Automatically fix file system errors. Windows fixes any errors on
the disk.]]
A message will popup.
[[The disk check could not be performed because the disk check utility needs
exclusive access to some Windows files on the disk. These files can be
accessed only by restarting Windows. Do you want to schedule this disk check
to occur the next time you restart the computer?]]
Click YES.
Then reboot.
For a look at the chkdsk log.
Open the Event Viewer...
Start | Run | Type: eventvwr | Click OK |
Look in Application | Listed as Information |
Event ID: 1001
Source: Winlogon
[[Description: This includes file system type; drive letter or GUID, and
volume name or serial number to help determine what volume Chkdsk ran
against. Also included is whether Chkdsk ran because a user scheduled it or
because the dirty bit was set.]]
[[When Autochk runs against a volume at boot time it records its output to a
file called Bootex.log in the root of the volume being checked. The Winlogon
service then moves the contents of each Bootex.log file to the Application
Event log.]]
[[This file states whether Chkdsk encountered any errors and, if so,
whether they were fixed.]]
Chkdsk
http://www.microsoft.com/resources/...windows/xp/all/reskit/en-us/prmb_tol_pwfd.asp
Chkdsk
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/chkdsk.mspx
Describes how to use the chkdsk command at the command line.
http://www.microsoft.com/windowsxp/...WINDOWSXP/home/using/productdoc/en/chkdsk.asp
Understanding what CHKDSK does
http://support.microsoft.com/kb/314835/en-us#XSLTH3154121123120121120120
From...
An explanation of the new /C and /I Switches that are available to use with
Chkdsk.exe
http://support.microsoft.com/kb/314835
--
Hope this helps. Let us know.
Wes
MS-MVP Windows Shell/User
InKemm556 said:How does one run chkdsk? All I see when I go to system tools is disk
cleanup and disk defragmenter. Also, I take it there is no scandisk with
windows xp?
Ask a Question
Want to reply to this thread or ask your own question?
You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.