Celeron 2600 MHZ at Temp 77 C ????

  • Thread starter Thread starter Kenny S
  • Start date Start date
K

Kenny S

My celeron 2600 MHZ is working at 77 C....

I just installed a program that tells me this...

the case, PSU and processor fans are working...

is this normal? Can It be fried??

HELP!
 
Sorry my mistake... this program I was using was counting something else on
another meter... The Bios says its 46 C....

So its ok
 
In Kenny S <[email protected]> had this to say:

My reply is at the bottom of your sent message:
My celeron 2600 MHZ is working at 77 C....

I just installed a program that tells me this...

the case, PSU and processor fans are working...

is this normal? Can It be fried??

HELP!

No, it's not normal. That would be about peak for a Celeron before you had
some serious issues IIRC. It's been ages since I've hung out in the
overclocker type forums but that's pretty hot. I'd get a second opinion from
another application. I don't suppose you smell an ozone type smell and have
problems with constant reboots? The max temp for the CPU that you have in
your PC is 67 - 77 C and running at the upper limits would be generally
considered a bad idea. Was the CPU doing something intensive at the time?
Were you running a benchmark or a burn-in? Had you just finished one a few
seconds before?

Galen
 
In Kenny S <[email protected]> had this to say:

My reply is at the bottom of your sent message:
Sorry my mistake... this program I was using was counting something
else on another meter... The Bios says its 46 C....

So its ok

Well, that's a good thing. It means you'll actually have to use your frying
pan to make a couple of eggs instead. FYI - If your CPU was that hot then
you'd probably have known about it.

Galen
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Back
Top