Can't run Vista RC1

G

Guest

I have toshiba Tecra A4 laptop, I tried to install vista on the laptop but
the computer stuck in windows start screen (after completion the
installation). I tried to reboot in safe mode but it also stuck at file
windows\system32\drivers\crcdisk.sys. I tried to repair the startup from the
DVD and to reinstall vista but it was not solved. I tried all options in
windows boot manager but with same results.

My laptop has a 2 Ghz centrino processor and 512 MB ram and ATI Mobility
Radeon x600 SE 128 MB graphic card knowing that my laptop has passed the test
of compatibility of Vista advisor.
 
T

Tom Ziegmann

Did you check the CRC of the ISO, maybe that particular file didn't burn
correctly? Also did you do an upgrade or a clean install?
 
G

Guest

thx for responding
I am making a clean install on a partition of my hard disk (20 GB) different
than the existing XP operation system (the hard disk is of 80 GB).
I can give you another hint:
I have the same problem with Beta version and RC1 version, both sticks at
windows\system32\drivers\crcdisk.sys
but in Beta version, I used the option in boot screen (Last successful known
configeration setting)(or something like this) which succeeded to open
windows but I need to do this everytime to run vista. I cannot use (start
windows normally).
This trick does not work with RC1.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
G

Guest

I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I do
so, it sticks in the same position as ever.
 
D

Doug

Gotta be a record!

Doug

Fares said:
I installed vista as clean installation on a partition in my hard disk (20
GB) where I have XP operation system on the main partition.

Well I can give you another hint.
I have the same problem with Beta version 2.
but i used to use a trick to overcome this problem to some extend.
I used an option in the boot screen (Last known good configeration )(or
something like that) which load windows vista and install hardware drives.
But I have to do this everytime I want to use vista and install the same
hardware drives again. That means I cannot start windows normally and if I
do
so, it sticks in the same position as ever.
Click to expand...
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Windows Vista extremely slow and unreliable after install 3
RC1 install fails 1
RC1 Upgrade issues 3
Will this Laptop run the Aero Features of Vista? 3
Will My New Laptop Run Vista Aero? 8
Windows update to Vista then wont boot 4
ATI Radeon Mobility X600 Drivers for Toshiba Tecra S2 1
Video Card memory 4

Top