Can't connect to updates

W

William

I am running a Linksys router. No firewall, other then NAT
on the router. I am able to connect to the internet, surf,
play, do whatever.

When I do a manual update. It says it can not find an
internet connection. I AM connected though. This is the
only program that cannot access. Any help would be greatly
appreciated.
 
R

Ross

I am also running a linksys wireless router, and have
exactly the same problem as you.
Can someone email me a fix for this?

Thanks
 
R

Ralph Gerbig

Same problem here with Netgear Wireless router.
-----Original Message-----
I am also running a linksys wireless router, and have
exactly the same problem as you.
Can someone email me a fix for this?

Thanks
.
 
G

Guest

Did some checking. Something is wrong on Microsoft's
end. Tracing network traffic just now, when you
select "File/Check for updates ..." it tries to open a
connection to 216.32.240.24 (with no success). Pinging
that address results in failure. Think they'll have to
get that system back up.
 
Z

Ziad O Hanlon

Same Problem Here.
Am behind a Modem Router Linksys wag54g.
Firmware 1.02.7 (dont think the router is the pb...but...)


The antispyware try to manually establish connexion:

GIANTAntiSpywareMain.exe:3968 TCP MYPC:3543
216.32.240.24:http SYN_SENT

Last responding Hop:13 199 ms ten2-3.tuk-76c-
1b.ntwk.msn.net [207.46.35.77]

Then (WOW....writing that comment...it went ok..as i
retry to get the exact error message)
The Only think i did between now and last failed test was
to connect on my modem-router via web interface...

Update Ok... (?? !!)

According to me...it can be a ARP cache pb...but am not
expert...

Ziad O'Hanlon

Ziad O'Hanlon
 
E

Ed Barba

I can't connect for updates either and I am strictly on dial up. Yet I could
connect yesterday. I think it is a problem with MS servers.
Ed
 
E

Ed Barba

I can't connect for updates either and I am strictly on dial up. Yet I could
connect yesterday. I think it is a problem with MS servers.
Ed
 
W

William

Thanks for the reply. Yeah, I found out that the far end
is having some issues and was advised to try again later.
Thanks again.

William
 
W

William

There is a problem at the far end. I was advised to try
again later. The update system is offline at the moment it
appears, so I don't think any of us are having problems.

William
 
E

Ed Barba

I just connected to the spyware updater and downloaded the new definitions
5680. It seems to be working fine now.
Ed
 
B

Bill Sanderson

Right. I don't know what this problem was, but I do know that it was real,
temporary, and at the far end of the connection--not a problem with the
software or networks your machine is connected to.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top