cannot reformat hardrive

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

when i try to reformat hardrive i cannot get into dos
unless i use a floppy disc then i cant change it from
A:/ to my "c" drive. I tried to use the windows xp disc
to reformat but at the agreement screen i am able to push
any other button besides F8 to accept the agreement.
Also when i try to run a scandisc or virus scan the
computer locks up and i have to restart by pressing the
power button on the cpu unit. Anyones help will be
greatly appreciated. Thanks.
 
The Windows XP CD is bootable and contains all the tools
necessary
to partition and format your drive. Follow this
procedure and allow
Windows XP to partition and format your drive:

NOTE: It would be best to physically disconnect all your
peripheral hardware
devices, except the monitor, mouse and
keyboard, before installing XP.

NOTE: If you have an internal Zip Drive installed,
physically disconnect the
EIDE and power cable to it before
proceeding, otherwise your main
hard drive may not be assigned the
customary C: drive letter.
After installing Windows XP, you may then
reconnect it.

1. Open your BIOS and set your "CD Drive as the first
bootable device".

===> Accessing Motherboard BIOS
===>
http://www.michaelstevenstech.com/bios_manufacturer.htm

2. Insert your Windows XP CD in the CD Drive and
reboot your computer.
3. You'll see a message to boot to the CD....follow
the instructions.
4. The setup menu will appear and you should elect to
delete all the existing
Windows partitions, then create a new partition,
then format the primary
partition (preferably NTFS) and proceed to install
Windows XP.

5. Clean Install Windows XP
http://michaelstevenstech.com/cleanxpinstall.html

[Courtesy of Michael Stevens, MS-MVP]

6. ==> Immediately after installing Windows XP, turn
on XP's Firewall.
==> http://www.microsoft.com/security/protect/

7. After Windows XP is installed, visit the Windows
Update website
and download the available "Critical Updates".

8. After installing the critical updates, be sure and
visit the support website
of the manufacturer of the computer to download
and install any
available Windows XP compatible drivers, such as
video adapter
and audio drivers.

9. If you happen to run into any installation
difficulties, use the following resources:

How to Troubleshoot Windows XP Problems During
Installation
http://support.microsoft.com/default.aspx?
scid=kb;EN-US;310064

Troubleshooting Windows XP Setup
http://www.kellys-korner-xp.com/xp_setup.htm

[Courtesy of MS-MVP Kelly Theriot]

Note: If you are unable to activate Windows XP via the
internet,
then select the option to "activate by
telephone".
 
when i try to reformat hardrive i cannot get into dos
unless i use a floppy disc then i cant change it from
A:/ to my "c" drive. I tried to use the windows xp disc
to reformat but at the agreement screen i am able to push
any other button besides F8 to accept the agreement.

You do it as part of a reinstall of the system after booting the XP CD
direct. Enter Setup, and *after* the license agreement acceptance take
New Install. When it asks you to confirm where, hit ESC; select and
delete the current partition and make a new RAW one to be formatted at
the next stage

The important point is the delete. Without that it will just go ahead
and make a new install over the top of the old one
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

NTLdr 1
NTLDR missing 4
Cant format hardrive 4
XP Pro install 3
Reloading MS-Pro 3
multiboot problem with 64bit 2
Can I Erase/Reformat DVD+R DL RW ? 14
Lost product code 10

Back
Top