Cannot get Session State to work

[Guest]

I've been on this for a while, and cannot figure it out. Can someone please
help with this message?

SessionState can only be used when EnableSessionState is set to true, either
in a configuration file or in the page directive. Please also make sure that
System.Web.SessionStateModule or a custom session state module is included in
the <configuration><system.web><httpModules> section in the application
configuration.

Here is my current web.config file

<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
\Windows\Microsoft.Net\Framework\v2.x\Config
-->
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<appSettings>
<add key="ReportServer" value="https://myserver/reportserver?/" />
</appSettings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
-->
<compilation debug="true">
<assemblies>
<add assembly="System.Design, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=B03F5F7F11D50A3A"/>
<add assembly="System.Windows.Forms, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=B77A5C561934E089"/>
</assemblies>
</compilation>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows">
<forms loginUrl="Index.aspx"
cookieless="UseUri" />
</authentication>
<authorization>
<allow users="*" />
</authorization>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
-->
<customErrors mode="Off">
</customErrors>
<trust level="Full" originUrl="" />

<httpModules>
<add name="Session" type="System.Web.SessionState.SessionStateModule"/>
</httpModules>

<!-- Enable session state for all the pages in the Web application. -->
<pages>
<controls>

<add tagPrefix="ajaxToolkit" namespace="System.Web.UI"
assembly="System.Web.Extensions, Version=1.0.61025.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35"/>
<add namespace="AjaxControlToolkit" assembly="AjaxControlToolkit"
tagPrefix="ajaxToolkit"/>
</controls>
</pages>

</system.web>
</configuration>

 

[Guest]

InProc Session State is enabled by default in ASP.NET 2.0 You do not need any
entries at all in the Web.config.

--Peter
"Inside every large program, there is a small program trying to get out."
http://www.eggheadcafe.com
http://petesbloggerama.blogspot.com
http://www.blogmetafinder.com

 

[Guest]

Not sure what you mean, but I do not have an InProc entry in my web.config
file.

 

[Juan T. Llibre]

re:
!> Not sure what you mean, but I do not have an InProc entry in my web.config file.

InProc is *also* the default.

If you want to disable SessionState *or* enable a different sessionState
management mode, other than InProc, you'll need to explicitly set those options.

Check to see if :

<section name="sessionState" type="System.Web.Configuration.SessionStateSection, System.Web,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" allowDefinition="MachineToApplication" />

....is in your machine.config file...it should be there.



Juan T. Llibre, asp.net MVP
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
======================================

 

[Guest]

I checked, and that entry is in my machine.config file. I still get the same
error about session state.

 

[Guest]

In my web.config, that was posted with my original quesiton, I have a
reference to Ajax, which I just added to my site. If I remove that and add
the below statement, my Session State works. How can I work this into my
web.config file? I've tried many combinations, but none worked. Or am I
looking in the wrong direction on how to fix this?

<pages enableSessionState="true" enableViewState="true"
enableViewStateMac="true" validateRequest="false" />

 

[Juan T. Llibre]

Try this :

<sessionState mode="InProc" cookieless="false" regenerateExpiredSessionId="false" timeout="20" />

If you don't mind Session ID's being reused, you can do with :

<sessionState mode="InProc" cookieless="false" timeout="20" />



Juan T. Llibre, asp.net MVP
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
======================================

 

[Guest]

That did not work. The only thing that works is the original line that I had
before I added Ajax entries. See below...

Original (Session state works, but I get a sys not defined on my Ajax pages):
<pages enableSessionState="true" enableViewState="true"
enableViewStateMac="true" validateRequest="false" />

Ajax Version (Ajax works, but now my Session State does not work):
<pages>
<controls>
<add tagPrefix="ajaxToolkit" namespace="System.Web.UI"
assembly="System.Web.Extensions, Version=1.0.61025.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35"/>
<add namespace="AjaxControlToolkit" assembly="AjaxControlToolkit"
tagPrefix="ajaxToolkit"/>
</controls>
</pages>

How can I incorporate the original session entry with the Ajax entries, and
have both things working at the same time?

Thanks a lot for your help.

 

[Scott Roberts]

Original (Session state works, but I get a sys not defined on my Ajax
pages):
<pages enableSessionState="true" enableViewState="true"
enableViewStateMac="true" validateRequest="false" />

Ajax Version (Ajax works, but now my Session State does not work):
<pages>
<controls>
<add tagPrefix="ajaxToolkit" namespace="System.Web.UI"
assembly="System.Web.Extensions, Version=1.0.61025.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35"/>
<add namespace="AjaxControlToolkit" assembly="AjaxControlToolkit"
tagPrefix="ajaxToolkit"/>
</controls>
</pages>

How can I incorporate the original session entry with the Ajax entries,
and
have both things working at the same time?

Just a guess, but maybe just add the attributes from your original "pages"
element to the working AJAX config like this:

<pages enableSessionState="true" enableViewState="true"
enableViewStateMac="true" validateRequest="false">
<controls>
<add tagPrefix="ajaxToolkit" namespace="System.Web.UI"
assembly="System.Web.Extensions, Version=1.0.61025.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35"/>
<add namespace="AjaxControlToolkit" assembly="AjaxControlToolkit"
tagPrefix="ajaxToolkit"/>
</controls>
</pages>

 

[Guest]

That's actually pretty easy Wannabe...

Try this:

<pages enableSessionState="true" enableViewState="true"
enableViewStateMac="true" validateRequest="false">
<controls>
<add tagPrefix="ajaxToolkit" namespace="System.Web.UI"
assembly="System.Web.Extensions, Version=1.0.61025.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35"/>
<add namespace="AjaxControlToolkit" assembly="AjaxControlToolkit"
tagPrefix="ajaxToolkit"/>
</controls>
</pages>

 

[Guest]

Thanks a lot...I am working on this all day, then all the sudden get two good
answers Thanks again Mike and Scott.