Cannot connect to Local Network

  • Thread starter Thread starter Hoang Tieu Binh
  • Start date Start date
H

Hoang Tieu Binh

I have a computer with two NIC (Network card). Ones for connecting to
Internet and ones for Local Network. I've already connect to Network
properly but I cannot connect to Local althought I can ping to my server.
When I change from Workgroup to Domain, Win requires account and password of
domain to join, but when I type correctly, it not allow and inform "The
network path not found"
I cannot understand. Help me please!
I use WindowXP and my Server is Window Server 2003
 
Try:

1. On the server go to AD Users and Computers and create a computer account
for the XP machine. If there is already such an account, delete it and
re-create it.

2. On the XP machine, right click My Network Places and select Properties.
Click Advanced and select Advanced Setting. Move the Local Area Connection
for the local network to the top of the Connections binding order.

3. Manually configure the TCP/IP settings for the local network NIC. There
should be no default gateway and primary DNS must point only to the IP
address of the Windows Server 2003 DC.

4. If none of the above works, check Event Viewer on the server for errors.

Doug Sherman
MCSE, MCSA, MCP+I, MVP
 
sounds like DNS issue. do you have an internal DNS? these pages may help,
network path not found "Network path not found" in a domain network 2 "Network path not found." in a domain network 3 "Network path not found" in a workgroup network - error 53 ...
www.chicagotech.net/pathnotfound.htm



domain faqs 2) "Network path not found." 3) "The remote computer is not available." ... The network path was not found." Also, if you attempt to ping by name from the ...
www.chicagotech.net/domainfaqs.htm




Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.
Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.
I have a computer with two NIC (Network card). Ones for connecting to
Internet and ones for Local Network. I've already connect to Network
properly but I cannot connect to Local althought I can ping to my server.
When I change from Workgroup to Domain, Win requires account and password of
domain to join, but when I type correctly, it not allow and inform "The
network path not found"
I cannot understand. Help me please!
I use WindowXP and my Server is Window Server 2003
 
Back
Top