You hit this one right on the nail head. I was afraid that would be the
answer, so I was attempting to find a better way.
Now I have to setup two servers as my external DNS servers (ns1.thenoc.us
and ns2.thenoc.us) which control the public IP information. Then I have to
setup my internal DNS servers (will be using two) that show everything the
external DNS servers do, BUT with the public IP addresses substituted with
internal non-routable IP Addresses that exist on the LAN.
This is not going to be fun, as I have quite a large (and always growing)
zone file. I feel that it will become a management nightmare.
Thanks for the input, and verifying what I was already afraid of.
Matt Mandalek
The NOC
www.thenoc.us
Then that could be loopback issue. This case may give you the tip,
Routing Can't access a computer behind a router · Can't access the TS from
inside using WAN IP or domain name · Cannot access other subnet using
Windows as router ...
www.chicagotech.net/routing.htm
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
No, the DNS works fine. I can do everything I need to from an outside
machine and if I ping
www.thenoc.us from the inside, I get a response on
the
public IP address. This is turn is passed through win2003-2 using Routing
via NAT/Firewall. There is a port forward on port 80 forwarding all data
to
win2003-3, which is the webserver.
This issues seems to only happen on my internal network. The machine I am
working from is on the same Class C subnet as all the servers.
Matt
If I understand your post correctly, you have a DNS issue. This search
result may help,
Troubleshooting DNS Why I can't perform external name resolution to the
root
hint servers on the Internet. Why our web site doesn't work internally ...
www.chicagotech.net/dnstroubleshooting.htm
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
I have setup counting on Machine1. It is connected directly to the
Internet
as well as my local network.
I have websites setup on Machine2 on my local network and am routing all
traffic from Machine1 port 80 to it.
I have another server on my local network, Machine3 that I use as a
workstation.
When i attempt to connect to my website from Machine3
(
http://www.domain.tld) I get the "Page can not be displyed". But, when
I
connect from a machine out on the Internet, it works fine.
What have I done wrong?
Thanks
Matt
(e-mail address removed)
