Bug or not? Microsoft Antispyware Program Timing issue (resolved in a way)

A

Answerpooler

I post on several forums Mainly on www.answerpool.com
I'm happy with the set up of the AntiSpyware Program
But this caused a wee bit of head scratching

This I found yesterday and it was confirmed by a
Moderator on the www.webuser.co.uk forum I posted to.
"Cure" Set the time to 00:00 AM and it "fixes" the issue
until MS issue a fix

quote:

For 2 consecutive days I have had to manually run the
Scan on the Microsoft Antispyware Program because it did
not start at its scheduled time of 23:30 .Only time I
usually run it manually is if I am offline at that time
OK?
But these 2 days I'm online and the scan should start at
11:30 PM prompt and the AVG update prompt comes at 11:40
(also scheduled)
But all I saw was the AVG Update and no Notification that
the Microsoft Antispyware Program had started or
finished. Flashes a summary box up regardless of Finding
a problem or not (only had 1 item in 3 months)
Puzzling.
Had a look at the schedule looked OK... Until I saw it
had been set to 11:30 AM Not touched the controls in
months! Reset it to the Old time pressed the "Update
Schedule" button and the display reverted to the earlier
time Did this several times same result
Set it earlier same thing But the only time I got it
to "Hold" on was 12 Midnight (0:00am) Don't ask why?
All my A/V and Spyware detectors are reporting nothing
(all quarantined items were deleted ages ago) This has
the Feeling of a trojan attack of some sort?
Anybody else see anything like this?


And the reply I got

quote:
Your note prompted me to check what mine was doing. I've
got a similar problem in that it hasn't done an automated
scan since July and I've just tried to change the time
from 0200 to 1800. As soon as I click Update Schedule it
goes back to 0600. Seems it can't handle the 24 hour
clock. Must have been the last software update that
changed things.
 
T

Tom Emmelot

Hello,

yes it is a bug, workaround if your outside the USA:

Go to start/Control Panel/Country settings
Change Language to US English.
Click on Apply
Open MSAS change all your time settings the way you wont.
Click on "Update Schedule"
Then go back to set your default Language.
MSAS will scan and update on the right time!
Don't Click "Update Schedule", anymore, then it go's back to the AM
times again!

With Regards >*< TOM >*<
 
R

Ron Chamberlin

At this time, the program is set to run on US time. Look for changes in
localization in future releases.


Ron Chamberlin
MS-MVP
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top