G
Guest
My laptop (Thinkpad T43), which has many problems, recently encountered
another error. When I am using the computer, it always suddenly get a blue
screen, with error information, and before I can read the information, the
system will reboot automatically in a few seconds. I checked the system
event log and below is what I found, which might be related information:
The computer has rebooted from a bugcheck. The bugcheck was: 0x1000007f
(0x00000008, 0x80042000, 0x00000000, 0x00000000). A dump was saved in:
C:\WINDOWS\Minidump\Mini061206-01.dmp.
my laptop has been sent to the repair center before and they changed the
motherboard and the wireless network card. but this time they said all
hardwares are OK.
also I got dump file below. please take a look. Please kindly help me. Thank
you!
Microsoft (R) Windows Debugger Version 6.6.0003.5
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini061306-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for
ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805531a0
Debug session time: Tue Jun 13 05:18:45.621 2006 (GMT-7)
System Uptime: 0 days 0:39:23.538
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for
ntoskrnl.exe
Loading Kernel Symbols
...............................................................................................................................................................................
Loading User Symbols
Loading unloaded module list
..........
Unable to load image SynTP.sys, Win32 error 2
*** WARNING: Unable to verify timestamp for SynTP.sys
*** ERROR: Module load completed but symbols could not be loaded for SynTP.sys
*******************************************************************************
*
*
* Bugcheck Analysis
*
*
*
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007F, {8, 80042000, 0, 0}
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for
mssmbios.sys
Probably caused by : SynTP.sys ( SynTP+6076 )
Followup: MachineOwner
---------
another error. When I am using the computer, it always suddenly get a blue
screen, with error information, and before I can read the information, the
system will reboot automatically in a few seconds. I checked the system
event log and below is what I found, which might be related information:
The computer has rebooted from a bugcheck. The bugcheck was: 0x1000007f
(0x00000008, 0x80042000, 0x00000000, 0x00000000). A dump was saved in:
C:\WINDOWS\Minidump\Mini061206-01.dmp.
my laptop has been sent to the repair center before and they changed the
motherboard and the wireless network card. but this time they said all
hardwares are OK.
also I got dump file below. please take a look. Please kindly help me. Thank
you!
Microsoft (R) Windows Debugger Version 6.6.0003.5
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini061306-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for
ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805531a0
Debug session time: Tue Jun 13 05:18:45.621 2006 (GMT-7)
System Uptime: 0 days 0:39:23.538
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for
ntoskrnl.exe
Loading Kernel Symbols
...............................................................................................................................................................................
Loading User Symbols
Loading unloaded module list
..........
Unable to load image SynTP.sys, Win32 error 2
*** WARNING: Unable to verify timestamp for SynTP.sys
*** ERROR: Module load completed but symbols could not be loaded for SynTP.sys
*******************************************************************************
*
*
* Bugcheck Analysis
*
*
*
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007F, {8, 80042000, 0, 0}
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** WARNING: Unable to verify timestamp for mssmbios.sys
*** ERROR: Module load completed but symbols could not be loaded for
mssmbios.sys
Probably caused by : SynTP.sys ( SynTP+6076 )
Followup: MachineOwner
---------