Blue scree appear with this error "PAGE_FAULT_IN_NONPAGED_AREA"

[indoor_war]

Hi!

My system randomly restart and in the start one bluescreen appears but
instantly disappear. Finally i notedown that error yesterday that is this:

A problem has been deducted and windows has been shut down to prevent damage
to your computer

PAGE_FAULT_IN_NONPAGED_AREA

If this is the first time you have seen this stop error screen restart you
computer. If this screen appears again follow these steps.

Check to make sure any new hardware or software is properly installed if
this is a new installation asks your hardware or software manufacturer for
any windows update you might need.

If problems continue disable or remove any newly installed hardware or
software disable BIOS memory option such as caching or shadowing. If you need
to use safemode to remove or disable component restart your computer press F8
to select advance startup option and then select safe mode.

Technical information:

*** STOP: 0x00000050 (0XFOAO3D7C, 0X00000000, 0X8050504F, 0X00000002)

Beginning dump of physical memory.
Physical memory dump complete.
Contact your system administrator or technical support.



And my system Specs are:
Intel Pentium D dual core 945
Elite Group Mother board P4M800-M v(2.0)
2 Gb Ram (DDR2 553Mhz), 160 GB hard (7200 RPM)

So please help me out.

 

[Bob I]

Item 50 left column,
http://aumha.org/a/stop.htm

perhaps run memory tests MEMTEST86 or other?

http://www.memtest86.com/

 

[Gerry]

iBackground information on Stop Error message
http://msdn2.microsoft.com/en-us/library/ms793437.aspx

0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
(Click to consult the online MSDN article.)
Requested data was not in memory. An invalid system memory address was
referenced. Defective memory (including main memory, L2 RAM cache, video
RAM) or incompatible software (including remote control and antivirus
software) might cause this Stop message, as may other hardware problems
(e.g., incorrect SCSI termination or a flawed PCI card).
Source: http://aumha.org/a/stop.htm

Remove the dust bunnies and test the RAM memory
http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

Check the hard drive for bad sectors by running chkdsk /f /r

Check the System log of Event Viewer for Error Reports.

Please post copies of all Error and Warning Reports appearing in the
System log in Event Viewer for the last boot. No Information Reports or
Duplicates please. Indicate which also appear in a previous boot.

You can access Event Viewer by selecting Start, Control Panel,
Administrative Tools, and Event Viewer.

A tip for posting copies of Error Reports! Run Event Viewer and double
click on the error you want to copy. In the window, which appears is a
button resembling two pages. Click the button and close Event
Viewer.Now start your message (email) and do a paste into the body of
the message. Make sure this is the first paste after exiting from
Event Viewer.

Are there any yellow question marks in Device Manager? Right click on
the My Computer icon on your Desktop and select Properties,
Hardware,Device Manager. If yes what is the Device Error code?

Try Start, Run, type "sigverif.exe" without quotes and hit OK. What
drivers are listed as unsigned? Disregard those which are not checked.

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~