BAD_POOL_HEADER 0x00000019 on upgrade to SP2

[Heidi Linda]

I've just upgraded my XPe database to service pack 2 and now I can't
produce and image that *doesn't* come up with this BSOD during FBA. I
started with a Vampire/XPPro emulation build, and then tried upgrading
a known-working SP1 build, and now I'm about to try a very minimal
build. The FBAlog just ends after installing the virtual serial ports,
with no apparent errors.
I've searched google groups, and found no useful references to this
error in the XPe newsgroup. Surely someone else has had this problem?

 

[Andy Allred [MS]]

Hi Heidi, long time no see.
Almost assuredly it's related to a driver. Do you have any third party
drivers imported into the database that you can boot without, in an attempt
to isolate the offender? If you know how to kernel debug then that's the
next step.
http://msdn.microsoft.com/library/en-us/w2kmsgs/1140.asp

Andy

 

[KM]

Heidi,

I've just upgraded my XPe database to service pack 2 and now I can't
produce and image that *doesn't* come up with this BSOD during FBA.
I started with a Vampire/XPPro emulation build, and then tried upgrading
a known-working SP1 build, and now I'm about to try a very minimal
build. The FBAlog just ends after installing the virtual serial ports,
with no apparent errors.

You may want to check SetupApi.log from that build to see what was a possible cause in the driver installations.

Also, it would definitely help you if you start a new image from scratch with a macro like Minlogon Sample macro. (just keep number
of software components as minimum as possible and it will help you much investigating the problem).