ati Catalyst won't function properly, possibly due to .net 2.0

  • Thread starter Thread starter Tony
  • Start date Start date
T

Tony

Hi,
I have a Vista Ultimate 64 SP1 PC with 8GB on a ASUS m3a78-HME HDMI mobo
with embedded Radeon 3200 chipset and a Phenom X3 9750 processor. .NET 3.5
is on the system with sp1 and all the .net 3.5 KB patches for backward
compatibility

When I tried to load the newest 64 Bit -suitable for Vista- Catalyst drivers
I got the message:
No ATI Graphics driver is installed or the ATI driver is not installed
properly. Please install the ATI driver apropriate for your ATI hardware.

The system end up with rather jagged appearance of fonts and a resolution
not suitable for my monitor.
I Install the Driver and the Catalyst control center separately.
The error message comes after the install of the Catalyst control center

I have no viruschecker running at install time. Forum messages on the web
indicate that the absence of .NET 2.0 prevents the Catalyst environment to
install properly.
I downloaded the.net 2.0 sp1 envirinment, but receives the error message:
,,This product is not supported on the Vista operatng system.''
This also closes the installaton of .NET 2.0
Anyone got an idea?

Kind regards,
Tony Thijs
Oriolus
 
I have seen this recently on a different Asus motherboard. Device Manager
showed that the driver had installed correctly but could not start.

Catalyst 8.11 installed and worked. I suggest you roll back until you find a
Catalyst version which works and wait to see if Catalyst 8.13 or later
resolves the issue.
 
you might uninstall all ATI software from Control Panel - Programs and Features

reboot.

then use the EXPRESS install with the RUN AS ADMINISTRATOR option to install the software.
never have a problem using this method.


(e-mail address removed)



Hi,
I have a Vista Ultimate 64 SP1 PC with 8GB on a ASUS m3a78-HME HDMI mobo
with embedded Radeon 3200 chipset and a Phenom X3 9750 processor. .NET 3.5
is on the system with sp1 and all the .net 3.5 KB patches for backward
compatibility

When I tried to load the newest 64 Bit -suitable for Vista- Catalyst drivers
I got the message:
No ATI Graphics driver is installed or the ATI driver is not installed
properly. Please install the ATI driver apropriate for your ATI hardware.

The system end up with rather jagged appearance of fonts and a resolution
not suitable for my monitor.
I Install the Driver and the Catalyst control center separately.
The error message comes after the install of the Catalyst control center

I have no viruschecker running at install time. Forum messages on the web
indicate that the absence of .NET 2.0 prevents the Catalyst environment to
install properly.
I downloaded the.net 2.0 sp1 envirinment, but receives the error message:
,,This product is not supported on the Vista operatng system.''
This also closes the installaton of .NET 2.0
Anyone got an idea?

Kind regards,
Tony Thijs
Oriolus
 
Hi Mikey,
I actually used that option. I took Dominique's advice and rolled back to an earlier version. For now it worked as before
Kind regards,
Tony Thijs


"mikeyhsd" <[email protected]> schreef in bericht you might uninstall all ATI software from Control Panel - Programs and Features

reboot.

then use the EXPRESS install with the RUN AS ADMINISTRATOR option to install the software.
never have a problem using this method.


(e-mail address removed)



Hi,
I have a Vista Ultimate 64 SP1 PC with 8GB on a ASUS m3a78-HME HDMI mobo
with embedded Radeon 3200 chipset and a Phenom X3 9750 processor. ..NET 3.5
is on the system with sp1 and all the .net 3.5 KB patches for backward
compatibility

When I tried to load the newest 64 Bit -suitable for Vista- Catalyst drivers
I got the message:
No ATI Graphics driver is installed or the ATI driver is not installed
properly. Please install the ATI driver apropriate for your ATI hardware.

The system end up with rather jagged appearance of fonts and a resolution
not suitable for my monitor.
I Install the Driver and the Catalyst control center separately.
The error message comes after the install of the Catalyst control center

I have no viruschecker running at install time. Forum messages on the web
indicate that the absence of .NET 2.0 prevents the Catalyst environment to
install properly.
I downloaded the.net 2.0 sp1 envirinment, but receives the error message:
,,This product is not supported on the Vista operatng system.''
This also closes the installaton of .NET 2.0
Anyone got an idea?

Kind regards,
Tony Thijs
Oriolus
 
Back
Top