"Application has failed to start..."

[Steve Wagner]

Dear Community,

We are moving our application from XP-Pro to XP-Embedded. The application
uses two imaging devices, a GigE Camera (Pleora) and a USB Camera
(Lumenera). Under XPE, both applications will not run and present the
following message:

"This application has failed to start because the application configuration
is incorrect. Reinstalling the application may fix this problem."

We disabled EWF before installing the above applications. When installing,
there were no apparent failures. If you recognize what component might be
missing, we would really appreciate your feedback.

Thanks,

Steve Wagner

 

[Sean Liming \(MVP\)]

1. If possible, try building a Full XP Pro like image and install your
application. If this works then there is a missing component.
http://www.seanliming.com/Docs/Full XP Pro_V1.pdf
http://www.seanliming.com/Components.html

2. You might want to run DependencyWalker on your application to capture all
the DLLs required to run the application.

Regards,

Sean Liming
www.sjjmicro.com / www.seanliming.com
Book Author - XP Embedded Advanced, XP Embedded Supplemental Toolkit