AN7 Won't boot anything !

M

mark206000

Hi :D

Just installed watercooling into the PC, and reset my mobo cause the
clocking was never set up right.

Rebooted - DISK BOOT FAILURE INSERT - SYSTEM DISK AND PRESS ENTER :x


Tried various settings on the bios, no change, put in XP boot cd,
spins up then gives the same error :(

Any ideas ? ? Have I stuck my statically charged fingers sumwhere
while puttin in the cooling and knackered the mobo ?! :x

Cheers Mark
 
M

Michael Hawes

mark206000 said:
Hi :D

Just installed watercooling into the PC, and reset my mobo cause the
clocking was never set up right.

Rebooted - DISK BOOT FAILURE INSERT - SYSTEM DISK AND PRESS ENTER :x


Tried various settings on the bios, no change, put in XP boot cd,
spins up then gives the same error :(

Any ideas ? ? Have I stuck my statically charged fingers sumwhere
while puttin in the cooling and knackered the mobo ?! :x

Cheers Mark
Does BIOS detect any storage devices? Have you used option to detect
hard drives?
Have you checked IDE enabled?
Mike.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top