M
Martureo Bob
I use Access 2000 ... SR-1
I have an application with all Modal Popups and have implemented a technique
to go from one form to another (hiding the calling form, and then making it
visible again on the return).
One form is designated at the main form and opens automatically at startup.
It has the buttons to go to all the rest of the forms.
All forms have a control box, with Max/Min/Close.
All forms are maximized upon entry.
The Access database window never appears.
Typically, if you clicked the "Restore Window" button, the form would shrink
to a smaller size, and you could then either minimize it or maximize it. No
problem.
But a couple of months ago, I noticed that Access would hang when I click
the "Restore Window" button on just two of the forms. I had to use the
Windows Task Manager to shut it down.
So I decided there may be something wrong with the forms. So I started with
blank forms, copied all the controls, set all the properties, copied all the
VBA code, recompiled, etc. Everything then worked fine --- I could again
use the "restore" button without any problems.
Then just recently, I noticed that this same problem cropped up on another
form. And then I noticed it on yet another form. I haven't tested all 50
forms in the application, but right now I belileve there are only these
latest two forms where this problem happens. And these are not the original
two.
Am I experiencing some sort of internal corruption of the form (as I
suspect).
Do I have to keep reconstructing forms to make the problem go away only to
find it re-appearing elsewhere? Or is there an actual solution?
Thanks in advance...
Bob.
I have an application with all Modal Popups and have implemented a technique
to go from one form to another (hiding the calling form, and then making it
visible again on the return).
One form is designated at the main form and opens automatically at startup.
It has the buttons to go to all the rest of the forms.
All forms have a control box, with Max/Min/Close.
All forms are maximized upon entry.
The Access database window never appears.
Typically, if you clicked the "Restore Window" button, the form would shrink
to a smaller size, and you could then either minimize it or maximize it. No
problem.
But a couple of months ago, I noticed that Access would hang when I click
the "Restore Window" button on just two of the forms. I had to use the
Windows Task Manager to shut it down.
So I decided there may be something wrong with the forms. So I started with
blank forms, copied all the controls, set all the properties, copied all the
VBA code, recompiled, etc. Everything then worked fine --- I could again
use the "restore" button without any problems.
Then just recently, I noticed that this same problem cropped up on another
form. And then I noticed it on yet another form. I haven't tested all 50
forms in the application, but right now I belileve there are only these
latest two forms where this problem happens. And these are not the original
two.
Am I experiencing some sort of internal corruption of the form (as I
suspect).
Do I have to keep reconstructing forms to make the problem go away only to
find it re-appearing elsewhere? Or is there an actual solution?
Thanks in advance...
Bob.