agp 1.0 compatibility

[socket7!]

Is there any modern ATI graphic card, that supports AGP 1.0 (x2)? I intend
to put the fastest possible video into my old socket7 system.

Thanks

 

[Inglo]

Is there any modern ATI graphic card, that supports AGP 1.0 (x2)? I intend
to put the fastest possible video into my old socket7 system.

Thanks

http://www.ati.com/support/faq/agpchart.html

 

[Mangyrat]

the 9700 pro is probly fastest you can use in agp 2x board.

 

[Deek Stern]

Is there any modern ATI graphic card, that supports AGP 1.0 (x2)? I
intend to put the fastest possible video into my old socket7 system.

Thanks

Be careful. Even if you find a card where the specs match, your old mobo
might not be able to supply enough power (Watts) to a newer video card. I
ran into this problem with my old slot 1 AGP V1.0 board trying to run a
lowley GF2MX card. The spec sheet said that it should work, but it would
lock up as soon as I tried to run anything that requrired 3D processing.
Seems that even though the voltages were right, 3D processing sucked too
much current from the MoBo so the voltage dropped off. Remember watts =
voltage x current. Power requirements (watts not volts) never seem to be
mentioned on the spec sheets. Even if you have a skookum power supply, the
Mobo must be able to deliver the electrons to your card.

 

[wired and confused]

9700 Pro will run on your system . Dont listen to them there idiots

 

[wired and confused]

You should get a 9700 np or a pro and u can find some usually on ebay cheap.
This card has 8 pipelines 256bit memory interface . This is the best card
for you . 9500 will be slower but for newer games the 9700 will work good
for them.