A8V Deluxe

T

Thomas

Don't know if this is the place for this question But I have a A8v Deluxe
MB and loaded win xp pro one the hardrive .But I can not get on the net
with my network connections It tell me no or limited connection and I
tried connection to modem with Ethernet card and usb and get same thing
will not receive any packets.
Does anyone know how to solve this
Thanks
Thomas
 
N

Nelson Lee

Thomas said:
Don't know if this is the place for this question But I have a A8v Deluxe
MB and loaded win xp pro one the hardrive .But I can not get on the net
with my network connections It tell me no or limited connection and I
tried connection to modem with Ethernet card and usb and get same thing
will not receive any packets.
Does anyone know how to solve this
Thanks
Thomas
Are the drivers for the Ethernet card installed? They're on the CD that
comes with the board. Otherwise, the only network connection that Windows XP
Pro detects in the initial install is through the firewire port.

Hope this helps

Nelson
 
N

Nero

"tried connection to modem with Ethernet card and usb and get same thing "
There is NO way that you would get the "limited connection"message/problem
with a USB modem as that problem is when the pc cannot get the right IP
address and only happens with NIC'S/Lan cards .
 
Z

Zeneca

It sound like a NIC setup problem, not a HW or drivers issue.
I would revise the settings of your net and test ethernet cable in other pc
(just in case).
 
H

Highlandish

Quoth The Raven "Nero said:
"tried connection to modem with Ethernet card and usb and get same
thing " There is NO way that you would get the "limited
connection"message/problem with a USB modem as that problem is when
the pc cannot get the right IP address and only happens with
NIC'S/Lan cards .

might be that this board has a gigabit LAN connecting to a 100Mb connection
 
P

Paul

Don't know if this is the place for this question But I have a A8v Deluxe
MB and loaded win xp pro one the hardrive .But I can not get on the net
with my network connections It tell me no or limited connection and I
tried connection to modem with Ethernet card and usb and get same thing
will not receive any packets.
Does anyone know how to solve this
Thanks
Thomas

Set up the Marvell Virtual Cable tester. I was surprised to
find on my GbE interface, that my Ethernet cable was bad.
Repeated insertion and removal of the cable, into the RJ45
connector, cleaned the gunk off the Asus connector pins.

The beauty of GbE chips, is they use all four pairs on the
Ethernet cable. GbE chips also support MDI/MDIX. What that
means, is you can connect from your computer, to a WAN or
LAN port on another device, and the GbE PHY on your computer
is smart enough to pick the right two pairs from a 10/100BT
interface by itself. In the old days, you might need a
null modem (rolled) ethernet cable to make such a connection.
GbE chips are truly flexible that way. It also means you
can connect a GbE computer to a 10/100BT computer, using
an ordinary Ethernet cable.

Give the VCT a try, and see if it reports the right number
of wire pairs are operational. Four pairs are needed for
a connection to a gigabit device. Two pairs are needed for
10/100BT.

HTH,
Paul
 
Z

zzipper

As soon as I got a board with Gigabit I bought new, good quality CAT5E
cables because I too discovered the old ones weren't as as good as I
thought. Much better connection now.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top