A7nx-e deluxe ram

  • Thread starter Thread starter steve lovenjak
  • Start date Start date
S

steve lovenjak

I just purchased this board ..works great so far ..i have 2 strips of 256
ddr pc 2100 infineon ram ,now .would there be a noticable difference if i
added pc 3200 512 stick extra or will the frequancy drop ?.
or should i sell the 2 256 and buy the single 512 mb pc 3200,and perhaps buy
an extra 512
on sale here for 99$ cdn ?..thanks
 
do not mix and match memory..and unless you are going to OC or buy an FSB400
CPU why bother...
 
steve lovenjak said:
I just purchased this board ..works great so far ..i have 2 strips of 256
ddr pc 2100 infineon ram ,now .would there be a noticable difference if i
added pc 3200 512 stick extra or will the frequancy drop ?.
or should i sell the 2 256 and buy the single 512 mb pc 3200,and perhaps
buy an extra 512
on sale here for 99$ cdn ?..thanks

It all depends on what FSB your cpu uses. PC2100 is ok for FSB of 133. If
you need a higher FSB 166 or 200 then get PC2700 or PC3200 accordingly. Or
if you want to overclock your cpu by rasing the FSB.

Matt
 
you should...these motherboards like to run in sync...if you start adjusting
it to maintain your CPU but up the FSB you tend to have some difficulties.
in sync (that is cpu and FSB both at 100%..133 mhz...)
 
If I set my FSB higher will i need to change my cpu as well ?.i have athalon
xp 2000 .the board i have is 400 fsb .
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

HP Memory Question 5
A7N8X-E Deluxe 1
Ram configutation on K8V 1
A8N-SLI deluxe suggestions an help. 2
A7NX Deluxe, Barton, and PC 2100 ? 1
Added RAM, system unstable 10
ASUS P4P800 with 2x 512 3200 DDR 1
New MOBO 13

Back
Top