Visioneer Strobe Pro Calibration Sheet

[Butch Lacadie]

Hi,
Could someone describe or provide a scanned copy of the
"Calibration Sheet" used to calibrate a Visioneer Strobe
Pro sheet fed scanner. I just bought one used without the
calibration sheet. I could easily generate one from Corel
Draw or something if the sheet is simple enough.
Thanks,
Butch

 

[CSM1]

Hi,
Could someone describe or provide a scanned copy of the
"Calibration Sheet" used to calibrate a Visioneer Strobe
Pro sheet fed scanner. I just bought one used without the
calibration sheet. I could easily generate one from Corel
Draw or something if the sheet is simple enough.
Thanks,
Butch

It is in the Strobe XP 200 Monthly Maintenance Kit for $10.
http://orders.visioneer.com/category.jsp?category=STROBEPROSPARES

 

[scottyfromsaratoga]

Take any sheet of white paper [5.5" tall x 8.5" wide] and paste a piece black sheet of construction paper 2.25" wide x 8.5" long on top of it.
Glue this strip at 3/4" from the bottom edge of the white sheet.

If you do not have construction paper, use a black magic marker or any black paint.

When calibration screen appears, inset this with the larger white part at top into scanner. [black is facing down].

Thats all it is.