Vertical display setting requires adjusting at boot

M

mshall2

Hi, all. I'm fairly computer savvy, but I can't seem to resolve the
following problem. What is happening is that as soon as Vista boots,
the screen area shifts "down" about one inch, and I have to adjust the
screen geometry manually with the monitor. I have tried using the tool
provided by Gateway (EzTune) to save these settings, but no luck. I
have also tried to update the drivers, but also with no luck. Any
suggestions??? Thanks much, Matt
 
A

Anish Bhattachan

It seems like faulty with monitor, try using same monitor with different PC.
or alternatively check the monitor connection.
 
M

mshall2

No..it happens even with another monitor. I think it has something to
do with the way the resolution settings are saved in the registry. Do
you know how to tweek these?
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Screen geometry problem - registry??? 9
My Advice - Dont upgrade EVER!!! 21
Monitor Driver 6
Monitor not in device manager, vertical lines on display 2
Safely removing devices and monitor blanking issue 4
Vertical lines and monitor not in device manager 1
Dosplay Brightness 1
Vertical taskbar with the Start button at the bottom 3

Top