unable to connect wireless

R

Rivera,Walter O.

Hi;

UNABLE TO CONNECT WIRELESS TO MY DSL GATEWAY.

IT TELL A MESSAGE "LIMITED OR NO CONNECTIVITY".
THE OPERATING SYSTEM IS WIN XP PRO SP2 WITH A USB ADAPTER DLINK DWL-120
11MBPS.
ANY HELP , PLEASE;

THANKS FOR ALL
WRIVERA
 
C

Chuck

Hi;

UNABLE TO CONNECT WIRELESS TO MY DSL GATEWAY.

IT TELL A MESSAGE "LIMITED OR NO CONNECTIVITY".
THE OPERATING SYSTEM IS WIN XP PRO SP2 WITH A USB ADAPTER DLINK DWL-120
11MBPS.
ANY HELP , PLEASE;

THANKS FOR ALL
WRIVERA

Walter,

First, please don't continue to type in all upper case letters. It's hard to
read, and is considered shouting here.

# Is there enough scope for the DHCP server on the gateway? Check what range is
configured for DHCP, and what addresses have been handed out. Verify from the
DHCP log on the gateway.
# Is there MAC filtering on the gateway?
# Are you using the right WEP (are you using any encryption?) key?
# Check the log on the gateway, see if any errors are being detected when you
try to associate with it.
# Where is the computer from the gateway? Horizontal and vertical distance, and
relative antenna alignment, are all important.
# Get something like NetStumbler (free), and verify that the computer sees the
gateway, with a decent S/N ratio. Look at S/N ratio, not signal level.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top