System License Violation on my first deployment

  • Thread starter Ronald D. Fellman
  • Start date
R

Ronald D. Fellman

I just downloaded XP embedded and was able to get through the tutorials and
create a bootable image. It boots a first time and immediately reboots. On
the second and all successive boots, I get the blue screen of death saying
"SYSTEM_LICENSE_VIOLATION". I had obtained a trial license via e-mail from
Microsoft and used this to install the full XP Embedded development
environment.

All I am trying to do is copy this to a second hard disk and boot. How do I
get rid of this error?

-ron
--
****************************************************************************
****
Ronald D. Fellman, Ph.D.
QVidia Technologies, Inc.
Phone: 858-792-6407
FAX: 858-792-9131
Mobile: 858-336-3601
E-mail: (e-mail address removed)
Web: www.QVidia.com

This e-mail message is for the sole use of the intended recipient(s) and may
contain QVidia's Proprietary, Confidential and Privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited.
****************************************************************************
****
 
K

KM

Ronald,

Check your Target Device Settings in TD to match your target system partition size.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

EWF Error 1: Failed getting protected volume configuration 2
Cannot install drivers from CD 1
System License Violation - Part II 2

Top