sudden network problem with "bridge" "bridging"

[saber13812002]

i have two connection in my pc in LAN.
switch is D-Link
Network card
100mbps 192.168.1.12
10 mbps 192.168.1.11
i select both of them and right click "bridge connections"
my switch and my lan Asleep.
ping not work 1/50 replied.
i think follow thw concept of Bridge :

when i bridge that 2 connection with together , my lan apart two part
on what logically reason?
therefor the result of bridge is:
connect two network by low back bone speed.
and not allow to broadcast massages.

 

[Steve Winograd [MVP]]

i have two connection in my pc in LAN.
switch is D-Link
Network card
100mbps 192.168.1.12
10 mbps 192.168.1.11
i select both of them and right click "bridge connections"
my switch and my lan Asleep.
ping not work 1/50 replied.
i think follow thw concept of Bridge :

when i bridge that 2 connection with together , my lan apart two part
on what logically reason?
therefor the result of bridge is:
connect two network by low back bone speed.
and not allow to broadcast massages.

Connecting two network adapters to the same network has no benefit and
can cause problems. Remove the network bridge. Choose one adapter
(probably the 100mbps one) and disconnect the other one.

The network bridge is designed to combine two or more separate
physical networks (e.g. wired and wireless) together. I've written a
web page with more information:

XP ICS - Network Bridge
http://www.practicallynetworked.com/sharing/xp_ics/networkbridge.htm
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com