Resetting ink levels

[stork]

I've replaced the color cartridge in my Dell A940 printer (was running very
low, while black ink still at 80%). Aligned cartridges, and the printer is
working just fine. However, the pop-up window that comes up when I hit
'Print', that displays ink levels has not detected the new cartridge. It
continued to go down until it told me the cartridge was completely empty. In
fact, it's almost full. Can find no instructions for resetting the meter.
Can anyone give me the steps? (Computer is Dell 4600C, running Windows XP
Home Edition). Thanks!

 

[Carey Frisch [MVP]]

Welcome to the Dell Community Forum!
http://forums.us.dell.com/supportforums?category.id=dprinter

--
Carey Frisch
Microsoft MVP
Windows XP - Shell/User
Microsoft Newsgroups

Be Smart! Protect Your PC!
http://www.microsoft.com/athome/security/protect/default.mspx

------------------------------------------------------------------------------

:

| I've replaced the color cartridge in my Dell A940 printer (was running very
| low, while black ink still at 80%). Aligned cartridges, and the printer is
| working just fine. However, the pop-up window that comes up when I hit
| 'Print', that displays ink levels has not detected the new cartridge. It
| continued to go down until it told me the cartridge was completely empty. In
| fact, it's almost full. Can find no instructions for resetting the meter.
| Can anyone give me the steps? (Computer is Dell 4600C, running Windows XP
| Home Edition). Thanks!

 

[Cari \(MS-MVP\)]

If they are Dell cartridges then read the printer manual. If they are
refilled, you'll probably be lookinf for some device to reset the chip on
the cartridges.

 

[Miss Perspicacia Tick]

If they are Dell cartridges then read the printer manual. If they are
refilled, you'll probably be lookinf for some device to reset the
chip on the cartridges.

You can't refill tanks - it just won't work. I also have to say the OP must
either not use the printer very much, or must be incredibly wealthy - as you
know, Dell printers can only take Dell tanks.

Depending on when - and where - the system was purchased, the printer could
have very well have been a freebie (but I hope it wasn't the pivotal
influence on purchase). A black tank is £25 and a colour £30 - the unit only
costs £50!