Problem with installing touch screen driver/application on XPe

[AS]

Hi,
I'm using XPe and want to use the touch screen utility.. I installed the
touch screen Appln. from 3M on Win2K and it works great. When I tried to
install the same application on the XPe, I got the error of Oledlg.dll not
found.. I searched through the newsgroups and found that I needed the "ole
dialog" component and I also needed the following files to install the
application:
aclui.dll
clb.dll
regedit.exe

I copied these files into the directory where the touch screen application
resides ( 1 .exe file and 3 .cab files) and ran the setup.exe from there...

It seems to have installed the application fine, (i.e. I can go to
start->programs->touch Screen program and see its settings etc) but it
doesn't run after startup the way it says to add an icon on the bottom right
toolbar while installing. I can see the touch signals pass back and forth
using a scope, but for some reason I cannot see any touch on my screen.. I
feel the touch application that should run in the background after XPe boots
up, is not running for some reason...

Any ideas on what I should do to get rid of this problem.. I'm also willing
to componentize the application, but don't know how to do that using a .exe
file...

Thanks,
Regards,

 

[Brad Combs]

AS,

Are any of the components on www.xpefiles.com under Components>Touchscreen
the one your looking for?

HTH,

Brad Combs
Imago Technologies

 

[AS]

Well I'm looking for the Microtouch SC4 touch screen controller.. Do you
know if that's available somewhere... There is one called Dynaprosc3.zip
but I'm not sure if it'll work for the SC4 also ...
Here's what it says about dynaprosc3.zip...

Driver for 3M dynapro touch-screen, Version 3.05.18P. Base on SC3,SC4
universal controleur driver but not test on SC4.
author: drez date entered: 2/27/2003


Thanks,
Regards,
AS

AS,

Are any of the components on www.xpefiles.com under Components>Touchscreen
the one your looking for?

HTH,

Brad Combs
Imago Technologies

 

[Brad Combs]

AS,

It will probably work as I think the 3M package is based on the UPDD which
is not device specific. I would say try it, if it fails report back here and
we'll see if we can help. If nothing else you could use it as a reference
and build a custom component from the files that you have.

HTH,

Brad Combs
Imago Technologies

Well I'm looking for the Microtouch SC4 touch screen controller.. Do you
know if that's available somewhere... There is one called Dynaprosc3.zip
but I'm not sure if it'll work for the SC4 also ...
Here's what it says about dynaprosc3.zip...

Driver for 3M dynapro touch-screen, Version 3.05.18P. Base on SC3,SC4
universal controleur driver but not test on SC4.
author: drez date entered: 2/27/2003


Thanks,
Regards,
AS