performance monitoring configuration and errors.

G

Guest

Hello,

In win2K there's a service called "Performance Logs and Alerts" which I try
to start.
It starts without an error, then stops. No error message.

I want to do some performance benchmarking, and can use the performance tool
in real-time mode, but when trying to schedule it (so that logs are created)
it fails.

The first point would be whether this service "Performance logs and alerts"
is required or not for the "batching" as opposed to real-time use of
performance logging on-screen?

Event viewer application log errors are as following when trying to start
the "counter log" created using Performance:
2003 followed by

1000,
1008,
2001
1010
2003
4313.


As a closing comment, presumably if a service isn't running (e.g. ftp), the
performance logging tool can handle this?
 
D

Dave Patrick

This link may help you.

http://www.microsoft.com/downloads/...98-C3A1-4644-9622-FAA046D69214&displaylang=en

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Hello,
|
| In win2K there's a service called "Performance Logs and Alerts" which I
try
| to start.
| It starts without an error, then stops. No error message.
|
| I want to do some performance benchmarking, and can use the performance
tool
| in real-time mode, but when trying to schedule it (so that logs are
created)
| it fails.
|
| The first point would be whether this service "Performance logs and
alerts"
| is required or not for the "batching" as opposed to real-time use of
| performance logging on-screen?
|
| Event viewer application log errors are as following when trying to start
| the "counter log" created using Performance:
| 2003 followed by
|
| 1000,
| 1008,
| 2001
| 1010
| 2003
| 4313.
|
|
| As a closing comment, presumably if a service isn't running (e.g. ftp),
the
| performance logging tool can handle this?
|
|
|
 
G

Guest

I have tried this utility but get an error message:-

"Remote registry service is not enabled."

Two other conditions for the error don't apply. (not being an administrator
& computer name is invalid).

Does this service have to be enabled for the running of the performance
tool?
I'm not sure why this service would be required.

cheers,
Malcolm.
 
D

Dave Patrick

Control Panel|Services|Remote Registry|General and set the startup type to
'Automatic'

AFAIK you can't schedule performance monitoring in Windows 2000

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
|I have tried this utility but get an error message:-
|
| "Remote registry service is not enabled."
|
| Two other conditions for the error don't apply. (not being an
administrator
| & computer name is invalid).
|
| Does this service have to be enabled for the running of the performance
| tool?
| I'm not sure why this service would be required.
|
| cheers,
| Malcolm.
 
G

Guest

Hi,

when I mention "schedule" I mean going to the performance bit of Win2k and
setting some counters and running this. i.e. basic use of the performance
tool.
It runs ok on screen, but not when logging the output. :(
 
D

Dave Patrick

The operating system will start the service when required. Such as when you
start a counter, trace log or alert.

The event ID's you posted are mostly useless without the rest of the error.

When you view the logged events in Event Viewer (double-click them in the
right-hand pane) in the upper right corner, third button down is a copy to
clipboard, then you can paste in the body of a reply message.

Also any System Log events (that are a Type: 'Error' or 'Warning') since
last boot so we can see all of the event detail.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Hello,
|
| In win2K there's a service called "Performance Logs and Alerts" which I
try
| to start.
| It starts without an error, then stops. No error message.
|
| I want to do some performance benchmarking, and can use the performance
tool
| in real-time mode, but when trying to schedule it (so that logs are
created)
| it fails.
|
| The first point would be whether this service "Performance logs and
alerts"
| is required or not for the "batching" as opposed to real-time use of
| performance logging on-screen?
|
| Event viewer application log errors are as following when trying to start
| the "counter log" created using Performance:
| 2003 followed by
|
| 1000,
| 1008,
| 2001
| 1010
| 2003
| 4313.
|
|
| As a closing comment, presumably if a service isn't running (e.g. ftp),
the
| performance logging tool can handle this?
|
|
|
 
G

Guest

Hi,

Here are more details for the errors. I hope it formats ok. Thanks for
looking into this.


4314 ERROR WINSCTRS Mon Feb 07 17:10:07 2005 Event Description Not Found:
Partial Description: No strings to display.
1003 ERROR W3Ctrs Mon Feb 07 17:10:07 2005 Event Description Not Found:
Partial Description: No strings to display.
2001 ERROR rasctrs Mon Feb 07 17:10:07 2005 Event Description Not Found:
Partial Description: No strings to display.
1000 ERROR PerfDisk Mon Feb 07 17:10:07 2005 Unable to open the Disk
performance object. Status code returned is data DWORD 0.
1000 ERROR FTPCtrs Mon Feb 07 17:10:06 2005 Event Description Not Found:
Partial Description: No strings to display.
1003 ERROR IISInfoCtrs Mon Feb 07 17:10:06 2005 Event Description Not
Found: Partial Description: No strings to display.
4314 ERROR WINSCTRS Mon Feb 07 15:00:26 2005 Event Description Not Found:
Partial Description: No strings to display.
2001 ERROR rasctrs Mon Feb 07 15:00:26 2005 Event Description Not Found:
Partial Description: No strings to display.
1000 ERROR PerfDisk Mon Feb 07 15:00:26 2005 Unable to open the Disk
performance object. Status code returned is data DWORD 0.
4314 ERROR WINSCTRS Mon Feb 07 14:53:01 2005 Event Description Not Found:
Partial Description: No strings to display.
2003 WARNING Perflib Mon Feb 07 14:53:01 2005 "The configuration
information of the performance library ""C:\WINNT\system32\w3ctrs.dll"" for
the ""W3SVC"" service does not match the trusted performance library
information stored in the registry. The functions in this library will not
be treated as trusted. "
1010 ERROR Perflib Mon Feb 07 14:53:01 2005 "The Collect Procedure for the
""Spooler"" service in DLL ""C:\WINNT\system32\winspool.drv"" generated an
exception or returned an invalid status. Performance data returned by
counter DLL will be not be returned in Perf Data Block. The exception or
status code returned is the first DWORD in the attached data. "
1008 ERROR Perflib Mon Feb 07 14:53:01 2005 "The Open Procedure for service
""RemoteAccess"" in DLL ""C:\WINNT\System32\rasctrs.dll"" failed.
Performance data for this service will not be available. The Status code
returned is the first DWORD in the attached data. "
2001 ERROR rasctrs Mon Feb 07 14:53:01 2005 Event Description Not Found:
Partial Description: No strings to display.
1008 ERROR Perflib Mon Feb 07 14:53:01 2005 "The Open Procedure for service
""PerfDisk"" in DLL ""C:\WINNT\system32\perfdisk.dll"" failed. Performance
data for this service will not be available. The Status code returned is the
first DWORD in the attached data. "
1000 ERROR PerfDisk Mon Feb 07 14:53:01 2005 Unable to open the Disk
performance object. Status code returned is data DWORD 0.
1008 ERROR Perflib Mon Feb 07 14:53:01 2005 "The Open Procedure for service
""PerfDisk"" in DLL ""C:\WINNT\system32\perfdisk.dll"" failed. Performance
data for this service will not be available. The Status code returned is the
first DWORD in the attached data. "
1000 ERROR PerfDisk Mon Feb 07 14:53:01 2005 Unable to open the Disk
performance object. Status code returned is data DWORD 0.
1008 ERROR Perflib Mon Feb 07 14:53:00 2005 "The Open Procedure for service
""PerfDisk"" in DLL ""C:\WINNT\system32\perfdisk.dll"" failed. Performance
data for this service will not be available. The Status code returned is the
first DWORD in the attached data. "
1000 ERROR PerfDisk Mon Feb 07 14:53:00 2005 Unable to open the Disk
performance object. Status code returned is data DWORD 0.
2003 WARNING Perflib Mon Feb 07 14:53:00 2005 "The configuration
information of the performance library ""C:\WINNT\system32\ftpctrs2.dll"" for
the ""MSFTPSVC"" service does not match the trusted performance library
information stored in the registry. The functions in this library will not
be treated as trusted. "


Dave Patrick said:
The operating system will start the service when required. Such as when you
start a counter, trace log or alert.

The event ID's you posted are mostly useless without the rest of the error.

When you view the logged events in Event Viewer (double-click them in the
right-hand pane) in the upper right corner, third button down is a copy to
clipboard, then you can paste in the body of a reply message.

Also any System Log events (that are a Type: 'Error' or 'Warning') since
last boot so we can see all of the event detail.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Hello,
|
| In win2K there's a service called "Performance Logs and Alerts" which I
try
| to start.
| It starts without an error, then stops. No error message.
|
| I want to do some performance benchmarking, and can use the performance
tool
| in real-time mode, but when trying to schedule it (so that logs are
created)
| it fails.
|
| The first point would be whether this service "Performance logs and
alerts"
| is required or not for the "batching" as opposed to real-time use of
| performance logging on-screen?
|
| Event viewer application log errors are as following when trying to start
| the "counter log" created using Performance:
| 2003 followed by
|
| 1000,
| 1008,
| 2001
| 1010
| 2003
| 4313.
|
|
| As a closing comment, presumably if a service isn't running (e.g. ftp),
the
| performance logging tool can handle this?
|
|
|
Click to expand...
 
D

Dave Patrick

:
| Hi,
|
| Here are more details for the errors. I hope it formats ok. Thanks for
| looking into this.
|
|
| 4314 ERROR WINSCTRS Mon Feb 07 17:10:07 2005 Event Description Not Found:
| Partial Description: No strings to display.
* WINS service installed but disabled.

| 1003 ERROR W3Ctrs Mon Feb 07 17:10:07 2005 Event Description Not Found:
| Partial Description: No strings to display.
* IIS may not be running.

| 2001 ERROR rasctrs Mon Feb 07 17:10:07 2005 Event Description Not Found:
| Partial Description: No strings to display.
| 1000 ERROR PerfDisk Mon Feb 07 17:10:07 2005 Unable to open the Disk
| performance object. Status code returned is data DWORD 0.
| 1000 ERROR FTPCtrs Mon Feb 07 17:10:06 2005 Event Description Not Found:
| Partial Description: No strings to display.
| 1003 ERROR IISInfoCtrs Mon Feb 07 17:10:06 2005 Event Description Not
| Found: Partial Description: No strings to display.
| 4314 ERROR WINSCTRS Mon Feb 07 15:00:26 2005 Event Description Not Found:
| Partial Description: No strings to display.
| 2001 ERROR rasctrs Mon Feb 07 15:00:26 2005 Event Description Not Found:
| Partial Description: No strings to display.
| 1000 ERROR PerfDisk Mon Feb 07 15:00:26 2005 Unable to open the Disk
| performance object. Status code returned is data DWORD 0.
| 4314 ERROR WINSCTRS Mon Feb 07 14:53:01 2005 Event Description Not Found:
| Partial Description: No strings to display.
* The above may be generated if the service is installed but is disabled or
otherwise no running.

You can use exctrlst.exe (Extensible Counter Listing Tool) from the resource
kit to enable/ disable the counters.
http://www.microsoft.com/windows2000/techinfo/reskit/tools/existing/exctrlst-o.asp


| 2003 WARNING Perflib Mon Feb 07 14:53:01 2005 "The configuration
| information of the performance library ""C:\WINNT\system32\w3ctrs.dll""
for
| the ""W3SVC"" service does not match the trusted performance library
| information stored in the registry. The functions in this library will
not
| be treated as trusted. "
* You may need to remove and reinstall IIS


| 1010 ERROR Perflib Mon Feb 07 14:53:01 2005 "The Collect Procedure for the
| ""Spooler"" service in DLL ""C:\WINNT\system32\winspool.drv"" generated an
| exception or returned an invalid status. Performance data returned by
| counter DLL will be not be returned in Perf Data Block. The exception or
| status code returned is the first DWORD in the attached data. "
* The data field will have the exception code.

| 1008 ERROR Perflib Mon Feb 07 14:53:01 2005 "The Open Procedure for
service
| ""RemoteAccess"" in DLL ""C:\WINNT\System32\rasctrs.dll"" failed.
| Performance data for this service will not be available. The Status code
| returned is the first DWORD in the attached data. "
* Again the data field will show the staus code.

| 2001 ERROR rasctrs Mon Feb 07 14:53:01 2005 Event Description Not Found:
| Partial Description: No strings to display.
* Reapplying service pack 4 may fix this problem or disable the counter if
RAS is not installed.


| 1008 ERROR Perflib Mon Feb 07 14:53:01 2005 "The Open Procedure for
service
| ""PerfDisk"" in DLL ""C:\WINNT\system32\perfdisk.dll"" failed.
Performance
| data for this service will not be available. The Status code returned is
the
| first DWORD in the attached data. "
| 1000 ERROR PerfDisk Mon Feb 07 14:53:01 2005 Unable to open the Disk
| performance object. Status code returned is data DWORD 0.
| 1008 ERROR Perflib Mon Feb 07 14:53:01 2005 "The Open Procedure for
service
| ""PerfDisk"" in DLL ""C:\WINNT\system32\perfdisk.dll"" failed.
Performance
| data for this service will not be available. The Status code returned is
the
| first DWORD in the attached data. "
| 1000 ERROR PerfDisk Mon Feb 07 14:53:01 2005 Unable to open the Disk
| performance object. Status code returned is data DWORD 0.
| 1008 ERROR Perflib Mon Feb 07 14:53:00 2005 "The Open Procedure for
service
| ""PerfDisk"" in DLL ""C:\WINNT\system32\perfdisk.dll"" failed.
Performance
| data for this service will not be available. The Status code returned is
the
| first DWORD in the attached data. "
| 1000 ERROR PerfDisk Mon Feb 07 14:53:00 2005 Unable to open the Disk
| performance object. Status code returned is data DWORD 0.
| 2003 WARNING Perflib Mon Feb 07 14:53:00 2005 "The configuration
| information of the performance library ""C:\WINNT\system32\ftpctrs2.dll""
for
| the ""MSFTPSVC"" service does not match the trusted performance library
| information stored in the registry. The functions in this library will
not
| be treated as trusted. "
* You may need to remove and reinstall FTP

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect
 
G

Guest

Hi,

Can you identify the main error(s) that could be stopping the performance
tool to work correctly?

Malcolm.


Dave Patrick said:
:
| Hi,
|
| Here are more details for the errors. I hope it formats ok. Thanks for
| looking into this.
|
|
| 4314 ERROR WINSCTRS Mon Feb 07 17:10:07 2005 Event Description Not Found:
| Partial Description: No strings to display.
* WINS service installed but disabled.

| 1003 ERROR W3Ctrs Mon Feb 07 17:10:07 2005 Event Description Not Found:
| Partial Description: No strings to display.
* IIS may not be running.

| 2001 ERROR rasctrs Mon Feb 07 17:10:07 2005 Event Description Not Found:
| Partial Description: No strings to display.
| 1000 ERROR PerfDisk Mon Feb 07 17:10:07 2005 Unable to open the Disk
| performance object. Status code returned is data DWORD 0.
| 1000 ERROR FTPCtrs Mon Feb 07 17:10:06 2005 Event Description Not Found:
| Partial Description: No strings to display.
| 1003 ERROR IISInfoCtrs Mon Feb 07 17:10:06 2005 Event Description Not
| Found: Partial Description: No strings to display.
| 4314 ERROR WINSCTRS Mon Feb 07 15:00:26 2005 Event Description Not Found:
| Partial Description: No strings to display.
| 2001 ERROR rasctrs Mon Feb 07 15:00:26 2005 Event Description Not Found:
| Partial Description: No strings to display.
| 1000 ERROR PerfDisk Mon Feb 07 15:00:26 2005 Unable to open the Disk
| performance object. Status code returned is data DWORD 0.
| 4314 ERROR WINSCTRS Mon Feb 07 14:53:01 2005 Event Description Not Found:
| Partial Description: No strings to display.
* The above may be generated if the service is installed but is disabled or
otherwise no running.

You can use exctrlst.exe (Extensible Counter Listing Tool) from the resource
kit to enable/ disable the counters.
http://www.microsoft.com/windows2000/techinfo/reskit/tools/existing/exctrlst-o.asp


| 2003 WARNING Perflib Mon Feb 07 14:53:01 2005 "The configuration
| information of the performance library ""C:\WINNT\system32\w3ctrs.dll""
for
| the ""W3SVC"" service does not match the trusted performance library
| information stored in the registry. The functions in this library will
not
| be treated as trusted. "
* You may need to remove and reinstall IIS


| 1010 ERROR Perflib Mon Feb 07 14:53:01 2005 "The Collect Procedure for the
| ""Spooler"" service in DLL ""C:\WINNT\system32\winspool.drv"" generated an
| exception or returned an invalid status. Performance data returned by
| counter DLL will be not be returned in Perf Data Block. The exception or
| status code returned is the first DWORD in the attached data. "
* The data field will have the exception code.

| 1008 ERROR Perflib Mon Feb 07 14:53:01 2005 "The Open Procedure for
service
| ""RemoteAccess"" in DLL ""C:\WINNT\System32\rasctrs.dll"" failed.
| Performance data for this service will not be available. The Status code
| returned is the first DWORD in the attached data. "
* Again the data field will show the staus code.

| 2001 ERROR rasctrs Mon Feb 07 14:53:01 2005 Event Description Not Found:
| Partial Description: No strings to display.
* Reapplying service pack 4 may fix this problem or disable the counter if
RAS is not installed.


| 1008 ERROR Perflib Mon Feb 07 14:53:01 2005 "The Open Procedure for
service
| ""PerfDisk"" in DLL ""C:\WINNT\system32\perfdisk.dll"" failed.
Performance
| data for this service will not be available. The Status code returned is
the
| first DWORD in the attached data. "
| 1000 ERROR PerfDisk Mon Feb 07 14:53:01 2005 Unable to open the Disk
| performance object. Status code returned is data DWORD 0.
| 1008 ERROR Perflib Mon Feb 07 14:53:01 2005 "The Open Procedure for
service
| ""PerfDisk"" in DLL ""C:\WINNT\system32\perfdisk.dll"" failed.
Performance
| data for this service will not be available. The Status code returned is
the
| first DWORD in the attached data. "
| 1000 ERROR PerfDisk Mon Feb 07 14:53:01 2005 Unable to open the Disk
| performance object. Status code returned is data DWORD 0.
| 1008 ERROR Perflib Mon Feb 07 14:53:00 2005 "The Open Procedure for
service
| ""PerfDisk"" in DLL ""C:\WINNT\system32\perfdisk.dll"" failed.
Performance
| data for this service will not be available. The Status code returned is
the
| first DWORD in the attached data. "
| 1000 ERROR PerfDisk Mon Feb 07 14:53:00 2005 Unable to open the Disk
| performance object. Status code returned is data DWORD 0.
| 2003 WARNING Perflib Mon Feb 07 14:53:00 2005 "The configuration
| information of the performance library ""C:\WINNT\system32\ftpctrs2.dll""
for
| the ""MSFTPSVC"" service does not match the trusted performance library
| information stored in the registry. The functions in this library will
not
| be treated as trusted. "
* You may need to remove and reinstall FTP

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect
Click to expand...
 
D

Dave Patrick

Generally it appears you have enabled counters for disabled services.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Hi,
|
| Can you identify the main error(s) that could be stopping the performance
| tool to work correctly?
|
| Malcolm.
 
G

Guest

Ok, that's useful. would the way ahead be to disable the counters listed in
the errors (if that's possible with a one-to-one relationship between
counters and services) and retry? Would the exception codes for the other
errors be useful?

cheers.
 
D

Dave Patrick

Yes, in general I would disable the counters you're not using. The codes may
be moot if you're not using the counter.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Ok, that's useful. would the way ahead be to disable the counters listed
in
| the errors (if that's possible with a one-to-one relationship between
| counters and services) and retry? Would the exception codes for the
other
| errors be useful?
|
| cheers.
 
G

Guest

Hi,

Is there anything else that would help resolve this problem? It's the same
as when I started the question.

Malcolm said:
Ok, that's useful. would the way ahead be to disable the counters listed in
the errors (if that's possible with a one-to-one relationship between
counters and services) and retry? Would the exception codes for the other
errors be useful?

cheers.

Dave Patrick said:
Generally it appears you have enabled counters for disabled services.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Hi,
|
| Can you identify the main error(s) that could be stopping the performance
| tool to work correctly?
|
| Malcolm.
Click to expand...
Click to expand...
 
D

Dave Patrick

Yes. You can tell us what was done recently. Are the event logs now free of
errors? Also give a specific example of something that is not working.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Hi,
|
| Is there anything else that would help resolve this problem? It's the
same
| as when I started the question.
|
| "Malcolm" wrote:
|
| > Ok, that's useful. would the way ahead be to disable the counters
listed in
| > the errors (if that's possible with a one-to-one relationship between
| > counters and services) and retry? Would the exception codes for the
other
| > errors be useful?
| >
| > cheers.
 
G

Guest

Hi,

There's a service called "Performance Logs and Alerts" which won't remain
"started". When I start it it goes to the "start" status then if I refresh,
it clears, so hasn't remained started. There's no error in event viewer for
this.
I assume that this service has to be started to use the Performance utility
when logging the output - is this correct?

When I use the Performance tool in logging mode I get several application
event messages - as detailed earlier in this thread. The message that
appears is:-


The <file name> log or alert hasn't started. Refresh the log or alert list
to view current status, or see the application event log for any errors"

Going to see the errors gives what I previously posted.

Presumably what it is trying to do is start the service "Performance Logs
and Alerts" but can't.
 
D

Dave Patrick

The operating system will start the service when required. Such as when you
start a counter, trace log or alert.

You may need to use exctrlst.exe (Extensible Counter Listing Tool) from the
resource kit to disable the counters for those services that are disabled or
otherwise not in use.

http://www.microsoft.com/windows2000/techinfo/reskit/tools/existing/exctrlst-o.asp

What specifically are you trying to setup?

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Hi,
|
| There's a service called "Performance Logs and Alerts" which won't remain
| "started". When I start it it goes to the "start" status then if I
refresh,
| it clears, so hasn't remained started. There's no error in event viewer
for
| this.
| I assume that this service has to be started to use the Performance
utility
| when logging the output - is this correct?
|
| When I use the Performance tool in logging mode I get several application
| event messages - as detailed earlier in this thread. The message that
| appears is:-
|
|
| The <file name> log or alert hasn't started. Refresh the log or alert list
| to view current status, or see the application event log for any errors"
|
| Going to see the errors gives what I previously posted.
|
| Presumably what it is trying to do is start the service "Performance Logs
| and Alerts" but can't.
 
G

Guest

Hi,

Here are the steps I'm trying:-


1. On your 2000 server or workstation, click Start, and select Programs,
Administrative Tools, Performance
Monitor.
2. Double-click Performance Logs and Alerts.
3. Select Counter Logs.
4. Right-click a blank area in the Details grid and select New Log Settings.
5. In Name, type the log name and click OK.
6. On the General tab, click Add to select the counters needed.
7. Allow the log to run for at least one day.
 
D

Dave Patrick

You didn't mention the specific counters. Best to use the tool to turn off
those that are not needed. You want to get to a point where Event Viewer is
free of errors.

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Hi,
|
| Here are the steps I'm trying:-
|
|
| 1. On your 2000 server or workstation, click Start, and select Programs,
| Administrative Tools, Performance
| Monitor.
| 2. Double-click Performance Logs and Alerts.
| 3. Select Counter Logs.
| 4. Right-click a blank area in the Details grid and select New Log
Settings.
| 5. In Name, type the log name and click OK.
| 6. On the General tab, click Add to select the counters needed.
| 7. Allow the log to run for at least one day.
 
G

Guest

Hi,

the counters I'd like are:

processor %processor time

memory pages/sec
available bytes

paging file %usage

cheers,
Malcolm.
 
D

Dave Patrick

You can probably turn off most of those others then. You may only need
perfproc, perfdisk, perfos, tcpip, and possibly perfnet

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Hi,
|
| the counters I'd like are:
|
| processor %processor time
|
| memory pages/sec
| available bytes
|
| paging file %usage
|
| cheers,
| Malcolm.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Unable to open the Performance Logs and Alerts configuration 1
Performance Logs & Alerts service 1
How to automatically start performance logging? 2
Unable to monitor remote server using perfmon 1
smlogsvc (performance logs and alerts) won't start on 2 DC's PLEASE HELP 2
Counter log issues 1
Remotly Performance Monitoring 1
Performance System Monitoring... well, not monitoring 1

Top