P3V4X and 933 FCPGA

[Roscoe]

I'm running:
Asus P3V4X
Abit Slotket 3
Cel 1.0 Ghz-128-100- S370
256 MB Ram, W98SE,
Bios Version 1006.003
MB set to jumper free
Slotket set to auto.
Works fine, except for some stuttering in high level graphics games like
NFL 2004, Call of Duty, etc.
Radeon 9200 128MB AGP
Is there any thing I need to do to slap in a P3 933-256-133-S370
and get it running?
Can't get the system to post.
Put in Celeron, ok, put in P3, no post?
Ideas?

 

[BigJim]

you may have to set the FSB to 133, your memory may or may not work if you
are running PC100.

 

[Roscoe]

Thanks for the response.
Not trying to be boneheaded but isn't that the purpose of having the MB set to
jumper free, or auto, so it will detedct CPU freq?
If I boot it with the Celeron, set the FSB to 133, RAM to1/1 and then
save and exit, can I then pull the power before it tries to reboot and stuff
the P3 in and then let it boot? Otherwise I'll need to set the jumpers on the
MB?
RAM is PC133.
mb

 

[Roscoe]

Thanks for the response.
Not trying to be boneheaded but isn't that the purpose of having the MB set to
jumper free, or auto, so it will detedct CPU freq?
If I boot it with the Celeron, set the FSB to 133, RAM to1/1 and then
save and exit, can I then pull the power before it tries to reboot and stuff
the P3 in and then let it boot? Otherwise I'll need to set the jumpers on the
MB?
RAM is PC133.
mb

 

[BigBadger]

Re-set the CMOS jumper.

 

[BigJim]

the slotket may have to be set to the 133 fsb for the motherboard to detect
the speed change.
I know what the adapter does but I am not familiar with that particular one.
if it does not do it automatically that is why I said you may have to do it
manually.
the board should then recognize it. that is my best guess. If you were using
a slot 1 the board would find it with no problems. Like I said you may also
want to check the memory for compatibility for the 133 FSB. good luck

 

[Darkfalz]

I'm running:
Asus P3V4X
Abit Slotket 3
Cel 1.0 Ghz-128-100- S370
256 MB Ram, W98SE,
Bios Version 1006.003
MB set to jumper free
Slotket set to auto.
Works fine, except for some stuttering in high level graphics games like
NFL 2004, Call of Duty, etc.
Radeon 9200 128MB AGP
Is there any thing I need to do to slap in a P3 933-256-133-S370
and get it running?
Can't get the system to post.
Put in Celeron, ok, put in P3, no post?
Ideas?

I'm running the same system and it works fine, except I'm using an ASUS
Slotket. Are their jumpers on the Slotket? Mine has jumpers to distinguish
between Celeron and P3 (matters for the default voltage).