New Hardware Wizard

R

Robert C

XP Pro, Canon S600 printer. Previously had printer
installed through router/print server. All worked well.
Now have new router and need to install printer back to
desktop. Uninstalled all previous per driver and printers
per "coribright" including the drivers tab. Got new driver
from Canon website. With printer off, ran Canon driver set
up and all seems to work well until instructed to turn on
printer. Then - Found New Hardware Wizard pops up and says
error occurred "the system cannot find the file specified."
Only option is to "finish." Cannot cancel the wizard and
cannot finish the installation. Tried ignoring and
rebooting and each time wizard pops up.
 
V

Victor D.

You said you had printer off. Did you disconnect the printer from the
computer like Cari's web site says?
 
G

Guest

Yes - printer cable was disconnected. Canon's setup software has three steps: first, connect the printer cable. second, turn on the printer. third, wait for the software to fine the printer port. As soon as I turn the printer on - the new hardware wizard pops up and I cannot finish the install.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Printer Installation New Hardware Wizard problem 3
Wireless problem with printer and netbook 0
Add Printer Wizard won't go away 2
"cannot install this hardware" with Canon S800 3
New Hardware Wizard Repeatedly Asks for Finish command on reboot 1
add a printer wizard don't work!!! 2
NO ADD PRINTER WIZARD 4
New Printer/Hardware wizard at every boot 4

Top