Networking 95 with XP Pro

M

Mario Llige

Hi

Is there any way of networking a 95 pc to XP?

I previously had 2 pcs running 95 and communicating well, so I know that the
hardware and software are ok on the 95 pc. I replaced the oldest pc with a
brand spanking new xp pc and I'm having trouble networking them. I know that
the networking wizard doesn't handle 95, so I've tried setting up the
protocols manually, but no luck.

Is connecting them possible? Please tell me how. Thanks.

Mario
 
S

Steve Winograd [MVP]

"Mario Llige" said:
Hi

Is there any way of networking a 95 pc to XP?

I previously had 2 pcs running 95 and communicating well, so I know that the
hardware and software are ok on the 95 pc. I replaced the oldest pc with a
brand spanking new xp pc and I'm having trouble networking them. I know that
the networking wizard doesn't handle 95, so I've tried setting up the
protocols manually, but no luck.

Is connecting them possible? Please tell me how. Thanks.

Mario

Since XP's Network Setup Wizard won't run on Windows 95, configure the
Windows 95 network settings manually. Go to Control Panel | Network
and

1. Add these network components if they aren't already present:

TCP/IP protocol
Client for Microsoft Networks
File and Printer Sharing for Microsoft Networks

2. Remove these network components if they're present:

IPX/SPX protocol
NetBEUI protocol
Client for NetWare networks

3. Set the workgroup name to MSHOME.

If you set up Windows XP as an Internet Connection Sharing host,
that's all there is to it. XP will share its Internet connection with
Windows 95 and automatically assign TCP/IP properties to it. Details
here:

Windows XP Internet Connection Sharing
http://www.practicallynetworked.com/sharing/xp_ics

If you don't use Internet Connection Sharing, you need to assign
static IP addresses to both computers.

On Windows XP:

1. Open the Network Connections folder.
2. Right click the network connection.
3. Click Properties.
4. Double click "Internet Protocol (TCP/IP).
5. Click "Use the following IP address".
6. Enter IP address 192.168.0.1.
7. Enter subnet mask 255.255.255.0.

On Windows 95:

1. Go to Control Panel | Network.
2. Double click "TCP/IP->network adapter".
3. Click "Specify an IP address".
4. Enter IP address 192.168.0.2.
5. Enter subnet mask 255.255.255.0.
--
Best Wishes,
Steve Winograd, MS-MVP (Windows Networking)

Please post any reply as a follow-up message in the news group
for everyone to see. I'm sorry, but I don't answer questions
addressed directly to me in E-mail or news groups.

Microsoft Most Valuable Professional Program
http://mvp.support.microsoft.com
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Top