Mouse will not work after installing SP2

M

MortAz

Greetings,

Had to do a repair of my XP installation after my computer would not
boot do to a missing or corrupt ntfs.sys file. Got the computer to boot
everything was working fine(including mouse). Continued installing
updates, installed Service Pack 2, restarted the computer. Mouse will
not work. The Computer does not detect it. Prior to the ntfs failure
computer worked fine with SP2 installed. Any ideas on what I should do?
:confused:


Thanks.
 
Y

Yves Leclerc

It would help if you were to describe what type of mouse. Does it connect
to USB, PS/2 or serial ports??

If USB, then make sure that you have install the motherbaord chipset drivers
and the USB2 drivers (if the motherboard maker provided one.) Then, remove
all the USB hubs, root hubs, ports and controller from Device Manager and
reboot. XP should re-detect these devices correctly. Then, reconnect you
mouse.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Mouse will not work after installing SP2 1
Boot problem after installing the new updates 2
Mouse doesn't work after boot or stops working in middle of sessio 6
disk boot failure after installing SP2 1
Mouse and keyboard will not work, even with restart 2
Mouse isn't working 2
XP SP2 Mouse is not functioning 4
system file missiing or corrupt 5

Top