Mini DV camcorder not recognized by PC

G

Guest

My Cannon ZR700 camocorder is no longer recognized by the computer. Until
about a week ago I could capture video from camcorder to hard drive with
Windows software or with NeroVision Express. Now both the computer and the
software do not recognize the camcorder. I tried both DV and USB connections.
Driver for fire wire board is OK. I shut down and restarted both the computer
and the camcorder.
I also tried to install by scanning the hardware in Device Manager. All to
no avail.
My computer info:
MS Home XP, NeroVision Express 3 SE, 3.0 Ghz Intel, 1 Gb RAM, 250 Gb HD.
I's appreciate any idea of how to go about finding a solution to this problem.
Thank you, Adam
 
C

Cari \(MS-MVP\)

Try the same camera and same cable on a friend's PC to try to narrow down
the problem. Check the firewire cable carefully to ensure it's securely
connected at each end.
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Help with extracting Video from Camcorder 1
DV camcorder connection "loses" network card/controller 4
Unable to record project back to Mini DV Camcorder 1
Mini-DV camcorder video to Vista 7
camcorder on port IEEE1394 not recognized by win XP 3
Unable to capture video from Mini-DV camcorder after SP2 2
Panasonic DV203 Camcorder Not Recognized by OS 6
DV Capture stops after 30 - 50 seconds 3

Top